lkml.org 
[lkml]   [2016]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v2 PATCH 2/4] phy: Add USB Type-C PHY driver for rk3399
From
Date


On Monday 13 June 2016 03:09 PM, Chris Zhong wrote:
> Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
> Type-C PHY is designed to support the USB3 and DP applications. The
> PHY basically has two main components: USB3 and DisplyPort. USB3
> operates in SuperSpeed mode and the DP can operate at RBR, HBR and
> HBR2 data rates.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>
> ---
>
> Changes in v2:
> - select RESET_CONTROLLER
> - alphabetic order
> - modify some spelling mistakes
> - make mode cleaner
> - use bool for enable/disable
> - check all of the return value
> - return a better err number
> - use more readx_poll_timeout()
> - clk_disable_unprepare(tcphy->clk_ref);
> - remove unuse functions, rockchip_typec_phy_power_on/off
> - remove unnecessary typecast from void *
> - use dts node to distinguish between phys.
>
> Changes in v1:
> - update the licence note
> - init core clock to 50MHz
> - use extcon API
> - remove unused global
> - add some comments for magic num
> - change usleep_range(1000, 2000) tousleep_range(1000, 1050)
> - remove __func__ from dev_err
> - return err number when get clk failed
> - remove ADDR_ADJ define
> - use devm_clk_get(&pdev->dev, "tcpdcore")
>
> drivers/phy/Kconfig | 8 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-rockchip-typec.c | 952 +++++++++++++++++++++++++++++++++
> include/linux/phy/phy-rockchip-typec.h | 20 +
> 4 files changed, 981 insertions(+)
> create mode 100644 drivers/phy/phy-rockchip-typec.c
> create mode 100644 include/linux/phy/phy-rockchip-typec.h
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 26566db..ec87b3a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -351,6 +351,14 @@ config PHY_ROCKCHIP_DP
> help
> Enable this to support the Rockchip Display Port PHY.
>
> +config PHY_ROCKCHIP_TYPEC
> + tristate "Rockchip TYPEC PHY Driver"
> + depends on ARCH_ROCKCHIP && OF
> + select GENERIC_PHY
> + select RESET_CONTROLLER
> + help
> + Enable this to support the Rockchip USB TYPEC PHY.
> +
> config PHY_ST_SPEAR1310_MIPHY
> tristate "ST SPEAR1310-MIPHY driver"
> select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 24596a9..91fa413 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
> obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
> +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
> new file mode 100644
> index 0000000..230e074
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-typec.c

<snip>

> +static const struct phy_ops rockchip_tcphy_ops = {
> + .owner = THIS_MODULE,

no ops?
> +};
> +
> +static int tcphy_pd_event(struct notifier_block *nb,
> + unsigned long event, void *priv)
> +{
> + struct rockchip_typec_phy *tcphy;
> + struct extcon_dev *edev = priv;
> + int value = edev->state;
> + int mode;
> + u8 is_plugged, dfp;
> +
> + tcphy = container_of(nb, struct rockchip_typec_phy, event_nb);
> +
> + is_plugged = GET_PLUGGED(value);
> + tcphy->flip = GET_FLIP(value);
> + dfp = GET_DFP(value);
> + tcphy->map = GET_PIN_MAP(value);
> +
> + if (is_plugged) {
> + if (!dfp)
> + mode = MODE_UFP_USB;
> + else if (tcphy->map & (PIN_MAP_B | PIN_MAP_D | PIN_MAP_F))
> + mode = MODE_DFP_USB | MODE_DFP_DP;
> + else if (tcphy->map & (PIN_MAP_A | PIN_MAP_C | PIN_MAP_E))
> + mode = MODE_DFP_DP;
> + else
> + mode = MODE_DFP_USB;
> + } else {
> + mode = MODE_DISCONNECT;
> + }
> +
> + if (tcphy->mode != mode) {
> + tcphy->mode = mode;
> + schedule_delayed_work_on(0, &tcphy->event_wq, 0);
> + }
> +
> + return 0;
> +}
> +
> +static void tcphy_event_wq(struct work_struct *work)
> +{
> + struct rockchip_typec_phy *tcphy;
> + int ret;
> +
> + tcphy = container_of(work, struct rockchip_typec_phy, event_wq.work);
> +
> + if (tcphy->mode == MODE_DISCONNECT) {
> + tcphy_phy_deinit(tcphy);
> + /* remove hpd sign for DP */
> + if (tcphy->hpd_status) {
> + regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> + DPTX_HPD_SEL_MASK | DPTX_HPD_DEL);
> + tcphy->hpd_status = 0;
> + }
> + } else {
> + ret = tcphy_phy_init(tcphy);
> + if (ret)
> + return;
> +
> + if (tcphy->mode & (MODE_UFP_USB | MODE_DFP_USB))
> + tcphy_usb3_init(tcphy);
> +
> + if (tcphy->mode & MODE_DFP_DP) {
> + ret = tcphy_dp_init(tcphy);
> +
> + /* set hpd sign for DP, if DP phy is ready */
> + if (!ret) {
> + regmap_write(tcphy->grf_regs, GRF_SOC_CON26,
> + DPTX_HPD_SEL_MASK | DPTX_HPD_SEL);
> + tcphy->hpd_status = 1;
> + }
> + }
> + }
> +}
> +
> +static int tcphy_get_param(struct device *dev,
> + struct usb3phy_reg *reg,
> + const char *name)
> +{
> + int ret, buffer[3];
> +
> + ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
> + if (ret) {
> + dev_err(dev, "Can not parse %s\n", name);
> + return ret;
> + }
> +
> + reg->offset = buffer[0];
> + reg->enable_bit = buffer[1];
> + reg->write_enable = buffer[2];
> + return 0;
> +}
> +
> +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
> + struct device *dev)
> +{
> + struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
> + int ret;
> +
> + ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
> + "rockchip,typec_conn_dir");
> + if (ret)
> + return ret;
> +
> + ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
> + "rockchip,usb3tousb2_en");
> + if (ret)
> + return ret;
> +
> + ret = tcphy_get_param(dev, &cfg->external_psm,
> + "rockchip,external_psm");
> + if (ret)
> + return ret;
> +
> + ret = tcphy_get_param(dev, &cfg->pipe_status,
> + "rockchip,pipe_status");
> + if (ret)
> + return ret;
> +
> + ret = tcphy_get_param(dev, &cfg->uphy_dp_sel,
> + "rockchip,uphy_dp_sel");
> + if (ret)
> + return ret;
> +
> + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "rockchip,grf");
> + if (IS_ERR(tcphy->grf_regs)) {
> + dev_err(dev, "could not find grf dt node\n");
> + return PTR_ERR(tcphy->grf_regs);
> + }
> +
> + tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
> + if (IS_ERR(tcphy->clk_core)) {
> + dev_err(dev, "could not get uphy core clock\n");
> + return PTR_ERR(tcphy->clk_core);
> + }
> +
> + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy_ref");
> + if (IS_ERR(tcphy->clk_ref)) {
> + dev_err(dev, "could not get uphy ref clock\n");
> + return PTR_ERR(tcphy->clk_ref);
> + }
> +
> + tcphy->phy_rst = devm_reset_control_get(dev, "tcphy");
> + if (IS_ERR(tcphy->phy_rst)) {
> + dev_err(dev, "no phy_rst reset control found\n");
> + return PTR_ERR(tcphy->phy_rst);
> + }
> +
> + tcphy->pipe_rst = devm_reset_control_get(dev, "tcphy_pipe");
> + if (IS_ERR(tcphy->pipe_rst)) {
> + dev_err(dev, "no pipe_rst reset control found\n");
> + return PTR_ERR(tcphy->pipe_rst);
> + }
> +
> + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy_tcphy");
> + if (IS_ERR(tcphy->uphy_rst)) {
> + dev_err(dev, "no uphy_rst reset control found\n");
> + return PTR_ERR(tcphy->uphy_rst);
> + }
> +
> + return 0;
> +}
> +
> +static int rockchip_typec_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct rockchip_typec_phy *tcphy;
> + struct resource *res;
> + struct phy_provider *phy_provider;
> + int ret;
> +
> + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
> + if (!tcphy)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + tcphy->base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(tcphy->base)) {
> + dev_err(dev, "failed to remap phy regs\n");
> + return PTR_ERR(tcphy->base);
> + }
> +
> + tcphy_parse_dt(tcphy, dev);
> +
> + tcphy->dev = dev;
> + platform_set_drvdata(pdev, tcphy);
> +
> + tcphy->mode = MODE_DISCONNECT;
> +
> + tcphy->phy = devm_phy_create(dev, NULL, &rockchip_tcphy_ops);


your phy_ops doesn't have any ops populated. Is there a reason to use the phy
framework?

Thanks
Kishon

\
 
 \ /
  Last update: 2016-06-17 15:41    [W:0.172 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site