lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 06/63] clocksource/drivers/asm9260: Convert init function to return error
Date
The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/asm9260_timer.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/asm9260_timer.c b/drivers/clocksource/asm9260_timer.c
index 217438d..d113c02 100644
--- a/drivers/clocksource/asm9260_timer.c
+++ b/drivers/clocksource/asm9260_timer.c
@@ -184,7 +184,7 @@ static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
* Timer initialization
* ---------------------------------------------------------------------------
*/
-static void __init asm9260_timer_init(struct device_node *np)
+static int __init asm9260_timer_init(struct device_node *np)
{
int irq;
struct clk *clk;
@@ -192,20 +192,26 @@ static void __init asm9260_timer_init(struct device_node *np)
unsigned long rate;

priv.base = of_io_request_and_map(np, 0, np->name);
- if (IS_ERR(priv.base))
- panic("%s: unable to map resource", np->name);
+ if (IS_ERR(priv.base)) {
+ pr_err("%s: unable to map resource", np->name);
+ return PTR_ERR(priv.base);
+ }

clk = of_clk_get(np, 0);

ret = clk_prepare_enable(clk);
- if (ret)
- panic("Failed to enable clk!\n");
+ if (ret) {
+ pr_err("Failed to enable clk!\n");
+ return ret;
+ }

irq = irq_of_parse_and_map(np, 0);
ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
DRIVER_NAME, &event_dev);
- if (ret)
- panic("Failed to setup irq!\n");
+ if (ret) {
+ pr_err("Failed to setup irq!\n");
+ return ret;
+ }

/* set all timers for count-up */
writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
@@ -229,6 +235,8 @@ static void __init asm9260_timer_init(struct device_node *np)
priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
event_dev.cpumask = cpumask_of(0);
clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
+
+ return 0;
}
-CLOCKSOURCE_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
+CLOCKSOURCE_OF_DECLARE_RET(asm9260_timer, "alphascale,asm9260-timer",
asm9260_timer_init);
--
1.9.1
\
 
 \ /
  Last update: 2016-06-17 00:21    [W:0.524 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site