lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 23/63] clocksource/drivers/moxart_timer: Convert init function to return error
Date
The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/mips-gic-timer.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index 89d3e4d..b164b87 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -146,7 +146,7 @@ static struct clocksource gic_clocksource = {
.archdata = { .vdso_clock_mode = VDSO_CLOCK_GIC },
};

-static void __init __gic_clocksource_init(void)
+static int __init __gic_clocksource_init(void)
{
int ret;

@@ -159,6 +159,8 @@ static void __init __gic_clocksource_init(void)
ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
if (ret < 0)
pr_warn("GIC: Unable to register clocksource\n");
+
+ return ret;
}

void __init gic_clocksource_init(unsigned int frequency)
@@ -179,31 +181,35 @@ static void __init gic_clocksource_of_init(struct device_node *node)
struct clk *clk;
int ret;

- if (WARN_ON(!gic_present || !node->parent ||
- !of_device_is_compatible(node->parent, "mti,gic")))
- return;
+ if (!gic_present || !node->parent ||
+ !of_device_is_compatible(node->parent, "mti,gic")) {
+ pr_warn("No DT definition for the mips gic driver");
+ return -ENXIO;
+ }

clk = of_clk_get(node, 0);
if (!IS_ERR(clk)) {
if (clk_prepare_enable(clk) < 0) {
pr_err("GIC failed to enable clock\n");
clk_put(clk);
- return;
+ return PTR_ERR(clk);
}

gic_frequency = clk_get_rate(clk);
} else if (of_property_read_u32(node, "clock-frequency",
&gic_frequency)) {
pr_err("GIC frequency not specified.\n");
- return;
+ return -EINVAL;;
}
gic_timer_irq = irq_of_parse_and_map(node, 0);
if (!gic_timer_irq) {
pr_err("GIC timer IRQ not specified.\n");
- return;
+ return -EINVAL;;
}

- __gic_clocksource_init();
+ ret = __gic_clocksource_init();
+ if (ret)
+ return ret;

ret = gic_clockevent_init();
if (!ret && !IS_ERR(clk)) {
@@ -213,6 +219,8 @@ static void __init gic_clocksource_of_init(struct device_node *node)

/* And finally start the counter */
gic_start_count();
+
+ return 0;
}
-CLOCKSOURCE_OF_DECLARE(mips_gic_timer, "mti,gic-timer",
+CLOCKSOURCE_OF_DECLARE_RET(mips_gic_timer, "mti,gic-timer",
gic_clocksource_of_init);
--
1.9.1
\
 
 \ /
  Last update: 2016-06-17 00:21    [W:0.519 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site