lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 32/63] clocksource/drivers/tegra20_timer: Convert init function to return error
Date
The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
drivers/clocksource/tango_xtal.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/tango_xtal.c b/drivers/clocksource/tango_xtal.c
index c407c47..7dc716c 100644
--- a/drivers/clocksource/tango_xtal.c
+++ b/drivers/clocksource/tango_xtal.c
@@ -19,7 +19,7 @@ static u64 notrace read_sched_clock(void)
return read_xtal_counter();
}

-static void __init tango_clocksource_init(struct device_node *np)
+static int __init tango_clocksource_init(struct device_node *np)
{
struct clk *clk;
int xtal_freq, ret;
@@ -27,13 +27,13 @@ static void __init tango_clocksource_init(struct device_node *np)
xtal_in_cnt = of_iomap(np, 0);
if (xtal_in_cnt == NULL) {
pr_err("%s: invalid address\n", np->full_name);
- return;
+ return -ENXIO;
}

clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("%s: invalid clock\n", np->full_name);
- return;
+ return PTR_ERR(clk);
}

xtal_freq = clk_get_rate(clk);
@@ -44,11 +44,13 @@ static void __init tango_clocksource_init(struct device_node *np)
32, clocksource_mmio_readl_up);
if (ret) {
pr_err("%s: registration failed\n", np->full_name);
- return;
+ return ret;
}

sched_clock_register(read_sched_clock, 32, xtal_freq);
register_current_timer_delay(&delay_timer);
+
+ return 0;
}

-CLOCKSOURCE_OF_DECLARE(tango, "sigma,tick-counter", tango_clocksource_init);
+CLOCKSOURCE_OF_DECLARE_RET(tango, "sigma,tick-counter", tango_clocksource_init);
--
1.9.1
\
 
 \ /
  Last update: 2016-06-17 00:21    [W:0.431 / U:3.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site