lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Intel-gfx] Bad flicker on skylake HQD due to code in the 4.7 merge window
From
Date
On Thu, 2016-06-16 at 23:24 +0200, Daniel Vetter wrote:
> On Thu, Jun 16, 2016 at 11:15 PM, James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote:
> > On Mon, 2016-06-13 at 13:14 +0300, Jani Nikula wrote:
> > > On Tue, 31 May 2016, James Bottomley <
> > > James.Bottomley@HansenPartnership.com> wrote:
> > > > On Tue, 2016-05-31 at 10:51 +0300, Jani Nikula wrote:
> > > > > On Mon, 30 May 2016, James Bottomley <
> > > > > James.Bottomley@HansenPartnership.com> wrote:
> > > > > > I've tested a pristine 4.6.0 system, so it's definitely
> > > > > > something
> > > > > > that
> > > > > > went in during the merge window. The flicker isn't
> > > > > > continuous,
> > > > > > it's
> > > > > > periodic, with an interval of something like 2-5 seconds.
> > > > > > It
> > > > > > looks
> > > > > > like an old analogue TV going out of sync and then
> > > > > > resyncing.
> > > > > > I've
> > > > > > attached the dmesg and X.org log below just in case they
> > > > > > can
> > > > > > help.
> > > > > > I
> > > > > > might be able to bisect this next week, but, unfortunately,
> > > > > > this is
> > > > > > my
> > > > > > current laptop and I'm travelling this week.
> > > > >
> > > > > Please try i915.enable_psr=0 module parameter.
> > > >
> > > > Makes no discernable difference. Current parameter settings
> > > > are:
> > >
> > > Sorry for the silence. Would you mind trying out drm-intel
> > > -nightly
> > > branch of [1]?
> > >
> > > BR,
> > > Jani.
> > >
> > > [1] http://cgit.freedesktop.org/drm-intel
> >
> > No, flicker is still there (and in fact seems worse) with the tree
> > with
> > this commit at the top:
> >
> > commit 3eb202ecc3668583f9ff4338211dbab47d755d1c
> > Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> > Date: Thu Jun 16 14:38:54 2016 +0200
> >
> > drm-intel-nightly: 2016y-06m-16d-12h-38m-37s UTC integration
> > manifest
>
> Strange indeed, I hoped the improved watermark code in -nightly would
> help. I assume nothing in dmesg about underruns or something similar?

Not that I can tell. I've attached the full dmesg just in case.

> I guess we'll need the bisect on this one to make progress.

Sigh, I was afraid that might be the next step.

James

[ 0.000000] Linux version 4.7.0-rc3+ (jejb@jarvis) (gcc version 4.8.5 (SUSE Linux) ) #4 SMP PREEMPT Thu Jun 16 13:57:07 PDT 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000069537fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x67a0b018-0x67a1b057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000000fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000001000-0x0000000000057fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000067a0b017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067a0b018-0x0000000067a1b057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000067a1b058-0x0000000069537fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000069538000-0x0000000069538fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000069539000-0x0000000069562fff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069563000-0x00000000695bdfff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000695be000-0x0000000069daefff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000069daf000-0x000000007907dfff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007907e000-0x00000000793f8fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000793f9000-0x0000000079448fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x0000000079449000-0x0000000079c00fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x0000000079c01000-0x000000007a4fefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000007a4ff000-0x000000007a4fffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000007a500000-0x000000007a5fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027effffff] usable
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7941a000 ACPI 2.0=0x7941a000 SMBIOS=0xf0000
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. XPS 13 9350/07TYC2, BIOS 1.3.3 03/01/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007B800000 mask 7FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x7a500 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0205d000, 0x0205dfff] PGTABLE
[ 0.000000] BRK [0x0205e000, 0x0205efff] PGTABLE
[ 0.000000] BRK [0x0205f000, 0x0205ffff] PGTABLE
[ 0.000000] BRK [0x02060000, 0x02060fff] PGTABLE
[ 0.000000] BRK [0x02061000, 0x02061fff] PGTABLE
[ 0.000000] BRK [0x02062000, 0x02062fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x2f6d2000-0x2ff3cfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007941A000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x000000007941A0B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007943A840 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007941A230 02060D (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x0000000079C00F80 000040
[ 0.000000] ACPI: APIC 0x000000007943A950 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007943A9D8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007943AA20 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007943AAC0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007943AB00 000038 (v01 DELL CBX3 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000007943AB38 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000007943AE50 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943AEE8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943B130 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007943DCE0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000007943E8C8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000007943E900 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000007943E958 000737 (v02 INTEL xh_rvp07 00000000 INTL 20120913)
[ 0.000000] ACPI: BOOT 0x000000007943F090 000028 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000007943F0B8 0035AE (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x0000000079442668 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000794426B0 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: MSDM 0x0000000079443528 000055 (v03 DELL CBX3 06222004 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x0000000079443580 003AE3 (v02 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SLIC 0x0000000079447068 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: TCPA 0x00000000794471E0 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: BGRT 0x0000000079447218 000038 (v00 ?\xffffffcdq{ 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x0000000079447250 0000F0 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: ASF! 0x0000000079447340 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x27efeb000-0x27effcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000069537fff]
[ 0.000000] node 0: [mem 0x0000000069563000-0x00000000695bdfff]
[ 0.000000] node 0: [mem 0x0000000069daf000-0x000000007907dfff]
[ 0.000000] node 0: [mem 0x000000007a4ff000-0x000000007a4fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000027effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[ 0.000000] On node 0 totalpages: 2062334
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7650 pages used for memmap
[ 0.000000] DMA32 zone: 489571 pages, LIFO batch:31
[ 0.000000] Normal zone: 24512 pages used for memmap
[ 0.000000] Normal zone: 1568768 pages, LIFO batch:31
[ 0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67a0b000-0x67a0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x67a1b000-0x67a1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69538000-0x69538fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x69539000-0x69562fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x695be000-0x69daefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7907e000-0x793f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x793f9000-0x79448fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79449000-0x79c00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79c01000-0x7a4fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a500000-0x7a5fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a600000-0x7bffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff88027ec00000 s104024 r8192 d31144 u524288
[ 0.000000] pcpu-alloc: s104024 r8192 d31144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2030087
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=UUID=994363fd-c12c-4c6c-92e9-85e8ac695cf9 ro resume=/dev/nvme0n1p2 splash=silent quiet showopts pcie_aspm=force
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3705616K/8249336K available (6703K kernel code, 1127K rwdata, 3016K rodata, 1656K init, 1648K bss, 498252K reserved, 0K cma-reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 2 loops
[ 0.000000] tsc: Detected 2399.930 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.86 BogoMIPS (lpj=9599720)
[ 0.000027] pid_max: default: 32768 minimum: 301
[ 0.000037] ACPI: Core revision 20160422
[ 0.000906] Security Framework initialized
[ 0.000912] AppArmor: AppArmor initialized
[ 0.001370] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002847] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003647] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003655] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003892] CPU: Physical Processor ID: 0
[ 0.003893] CPU: Processor Core ID: 0
[ 0.003897] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003898] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003903] mce: CPU supports 8 MCE banks
[ 0.003912] CPU0: Thermal monitoring enabled (TM1)
[ 0.003932] process: using mwait in idle threads
[ 0.003935] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.003936] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.004299] Freeing SMP alternatives memory: 24K (ffffffff81eb9000 - ffffffff81ebf000)
[ 0.014818] ftrace: allocating 26985 entries in 106 pages
[ 0.026274] smpboot: Max logical packages: 2
[ 0.026285] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.026290] DMAR: Host address width 39
[ 0.026292] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.026299] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
[ 0.026300] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.026304] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.026306] DMAR: RMRR base: 0x0000007918b000 end: 0x000000791aafff
[ 0.026307] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[ 0.026309] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.026309] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.026311] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.026312] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.026313] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.026314] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.027801] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.027803] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.031923] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071618] TSC deadline timer enabled
[ 0.071623] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
[ 0.071627] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.071656] ... version: 4
[ 0.071657] ... bit width: 48
[ 0.071658] ... generic registers: 4
[ 0.071659] ... value mask: 0000ffffffffffff
[ 0.071660] ... max period: 0000ffffffffffff
[ 0.071660] ... fixed-purpose events: 3
[ 0.071661] ... event mask: 000000070000000f
[ 0.100938] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120979] x86: Booting SMP configuration:
[ 0.120980] .... node #0, CPUs: #1 #2 #3
[ 0.395148] x86: Booted up 1 node, 4 CPUs
[ 0.395152] smpboot: Total of 4 processors activated (19202.83 BogoMIPS)
[ 0.414326] node 0 initialised, 1011367 pages in 12ms
[ 0.423210] devtmpfs: initialized
[ 0.423275] x86/mm: Memory block size: 128MB
[ 0.435150] PM: Registering ACPI NVS region [mem 0x69538000-0x69538fff] (4096 bytes)
[ 0.435151] PM: Registering ACPI NVS region [mem 0x79449000-0x79c00fff] (8093696 bytes)
[ 0.435352] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.447127] pinctrl core: initialized pinctrl subsystem
[ 0.447242] RTC time: 21:13:27, date: 06/16/16
[ 0.459853] NET: Registered protocol family 16
[ 0.475164] cpuidle: using governor ladder
[ 0.487185] cpuidle: using governor menu
[ 0.487236] Simple Boot Flag at 0x47 set to 0x80
[ 0.487264] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.487266] ACPI: bus type PCI registered
[ 0.487267] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.511281] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.511283] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.511290] PCI: Using configuration type 1 for base access
[ 0.511300] dmi type 0xB1 record - unknown flag
[ 0.535343] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.535345] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.559342] ACPI: Added _OSI(Module Device)
[ 0.559344] ACPI: Added _OSI(Processor Device)
[ 0.559345] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.559346] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.588073] ACPI: Executed 21 blocks of module-level executable AML code
[ 0.599755] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.603747] ACPI: 9 ACPI AML tables successfully acquired and loaded

[ 0.619069] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.727655] ACPI: Dynamic OEM Table Load:
[ 0.727662] ACPI: SSDT 0xFFFF88027EDC4800 00061E (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.728729] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.730236] ACPI: Dynamic OEM Table Load:
[ 0.730242] ACPI: SSDT 0xFFFF88027ED7D800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.732086] ACPI: Dynamic OEM Table Load:
[ 0.732091] ACPI: SSDT 0xFFFF88027EDC4000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.733571] ACPI: Dynamic OEM Table Load:
[ 0.733575] ACPI: SSDT 0xFFFF88027EC79C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.736852] ACPI : EC: EC started
[ 0.768539] ACPI: Interpreter enabled
[ 0.768580] ACPI: (supports S0 S3 S4 S5)
[ 0.768581] ACPI: Using IOAPIC for interrupt routing
[ 0.768620] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.770493] ACPI: Power Resource [PG00] (on)
[ 0.770931] ACPI: Power Resource [PG01] (on)
[ 0.771348] ACPI: Power Resource [PG02] (on)
[ 0.773449] ACPI: Power Resource [WRST] (off)
[ 0.773873] ACPI: Power Resource [WRST] (off)
[ 0.774295] ACPI: Power Resource [WRST] (off)
[ 0.774714] ACPI: Power Resource [WRST] (off)
[ 0.775140] ACPI: Power Resource [WRST] (off)
[ 0.775562] ACPI: Power Resource [WRST] (off)
[ 0.775981] ACPI: Power Resource [WRST] (off)
[ 0.776400] ACPI: Power Resource [WRST] (off)
[ 0.776817] ACPI: Power Resource [WRST] (off)
[ 0.777265] ACPI: Power Resource [WRST] (off)
[ 0.777693] ACPI: Power Resource [WRST] (off)
[ 0.778112] ACPI: Power Resource [WRST] (off)
[ 0.778529] ACPI: Power Resource [WRST] (off)
[ 0.778960] ACPI: Power Resource [WRST] (off)
[ 0.779378] ACPI: Power Resource [WRST] (off)
[ 0.779800] ACPI: Power Resource [WRST] (off)
[ 0.780218] ACPI: Power Resource [WRST] (off)
[ 0.780643] ACPI: Power Resource [WRST] (off)
[ 0.781061] ACPI: Power Resource [WRST] (off)
[ 0.781477] ACPI: Power Resource [WRST] (off)
[ 0.797248] ACPI: Power Resource [FN00] (off)
[ 0.797379] ACPI: Power Resource [FN01] (off)
[ 0.797506] ACPI: Power Resource [FN02] (off)
[ 0.797631] ACPI: Power Resource [FN03] (off)
[ 0.797759] ACPI: Power Resource [FN04] (off)
[ 0.799126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.799132] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.799183] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
[ 0.799184] _OSC request data: 1 1f 0
[ 0.799187] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.799929] PCI host bridge to bus 0000:00
[ 0.799932] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.799933] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.799935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.799936] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.799937] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.799939] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.799940] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.799941] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.799942] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.799944] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.799945] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.799946] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.799947] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.799949] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.799950] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.799951] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.799953] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.799960] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[ 0.800107] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[ 0.800116] pci 0000:00:02.0: reg 0x10: [mem 0xdb000000-0xdbffffff 64bit]
[ 0.800122] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.800126] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.800291] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.800301] pci 0000:00:04.0: reg 0x10: [mem 0xdc320000-0xdc327fff 64bit]
[ 0.800534] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.800554] pci 0000:00:14.0: reg 0x10: [mem 0xdc310000-0xdc31ffff 64bit]
[ 0.800627] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.800765] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.800808] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.800827] pci 0000:00:14.2: reg 0x10: [mem 0xdc338000-0xdc338fff 64bit]
[ 0.801102] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.801310] pci 0000:00:15.0: reg 0x10: [mem 0xdc337000-0xdc337fff 64bit]
[ 0.802288] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.802483] pci 0000:00:15.1: reg 0x10: [mem 0xdc336000-0xdc336fff 64bit]
[ 0.803399] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.803417] pci 0000:00:16.0: reg 0x10: [mem 0xdc335000-0xdc335fff 64bit]
[ 0.803489] pci 0000:00:16.0: PME# supported from D3hot
[ 0.803663] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.803678] pci 0000:00:17.0: reg 0x10: [mem 0xdc330000-0xdc331fff]
[ 0.803686] pci 0000:00:17.0: reg 0x14: [mem 0xdc334000-0xdc3340ff]
[ 0.803696] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.803705] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.803714] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.803723] pci 0000:00:17.0: reg 0x24: [mem 0xdc333000-0xdc3337ff]
[ 0.803769] pci 0000:00:17.0: PME# supported from D3hot
[ 0.803944] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.804017] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.804187] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.804237] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
[ 0.804310] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.804476] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.804515] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.804585] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.804751] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.804795] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[ 0.804860] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.805023] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.805091] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[ 0.805349] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.805359] pci 0000:00:1f.2: reg 0x10: [mem 0xdc32c000-0xdc32ffff]
[ 0.805556] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[ 0.805578] pci 0000:00:1f.3: reg 0x10: [mem 0xdc328000-0xdc32bfff 64bit]
[ 0.805604] pci 0000:00:1f.3: reg 0x20: [mem 0xdc300000-0xdc30ffff 64bit]
[ 0.805655] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.805846] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.805892] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.805940] pci 0000:00:1f.4: reg 0x10: [mem 0xdc332000-0xdc3320ff 64bit]
[ 0.806011] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.806343] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.806348] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.806353] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.806500] pci 0000:3a:00.0: [8086:095a] type 00 class 0x028000
[ 0.806544] pci 0000:3a:00.0: reg 0x10: [mem 0xdc200000-0xdc201fff 64bit]
[ 0.806725] pci 0000:3a:00.0: PME# supported from D0 D3hot D3cold
[ 0.806858] pci 0000:3a:00.0: System wakeup disabled by ACPI
[ 0.810972] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.810976] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.811105] pci 0000:3b:00.0: [10ec:525a] type 00 class 0xff0000
[ 0.811133] pci 0000:3b:00.0: reg 0x14: [mem 0xdc100000-0xdc100fff]
[ 0.811251] pci 0000:3b:00.0: supports D1 D2
[ 0.811252] pci 0000:3b:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.811350] pci 0000:3b:00.0: System wakeup disabled by ACPI
[ 0.818977] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.818981] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.819102] pci 0000:3c:00.0: [144d:a802] type 00 class 0x010802
[ 0.819122] pci 0000:3c:00.0: reg 0x10: [mem 0xdc000000-0xdc003fff 64bit]
[ 0.819131] pci 0000:3c:00.0: reg 0x18: [io 0xe000-0xe0ff]
[ 0.819326] pci 0000:3c:00.0: System wakeup disabled by ACPI
[ 0.826987] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.826990] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.826993] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.829488] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829563] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.829635] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829707] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829780] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829852] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829924] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.829996] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.832140] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.832168] ACPI : EC: EC stopped
[ 0.833301] ACPI : EC: GPE = 0x14, I/O: command/status = 0x934, data = 0x930
[ 0.833302] ACPI : EC: EC started
[ 0.864877] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.864879] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.864882] vgaarb: loaded
[ 0.864883] vgaarb: bridge control possible 0000:00:02.0
[ 0.875111] SCSI subsystem initialized
[ 0.875140] libata version 3.00 loaded.
[ 0.875239] PCI: Using ACPI for IRQ routing
[ 0.899276] PCI: pci_cache_line_size set to 64 bytes
[ 0.899425] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.899426] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.899428] e820: reserve RAM buffer [mem 0x67a0b018-0x67ffffff]
[ 0.899429] e820: reserve RAM buffer [mem 0x69538000-0x6bffffff]
[ 0.899430] e820: reserve RAM buffer [mem 0x695be000-0x6bffffff]
[ 0.899432] e820: reserve RAM buffer [mem 0x7907e000-0x7bffffff]
[ 0.899433] e820: reserve RAM buffer [mem 0x7a500000-0x7bffffff]
[ 0.899435] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[ 0.899529] NetLabel: Initializing
[ 0.899530] NetLabel: domain hash size = 128
[ 0.899531] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.899542] NetLabel: unlabeled traffic allowed by default
[ 0.899636] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.899641] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.901686] clocksource: Switched to clocksource hpet
[ 0.907094] VFS: Disk quotas dquot_6.6.0
[ 0.917743] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.933777] AppArmor: AppArmor Filesystem Enabled
[ 0.933815] pnp: PnP ACPI init
[ 0.934082] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.934084] system 00:00: [io 0xffff] has been reserved
[ 0.934085] system 00:00: [io 0xffff] has been reserved
[ 0.934087] system 00:00: [io 0xffff] has been reserved
[ 0.934088] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.934090] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.934093] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.934191] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.934237] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.934239] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.934343] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.934365] pnp 00:04: Plug and Play ACPI device, IDs DLL0704 PNP0f13 (active)
[ 0.934650] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.934652] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.934653] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.934655] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.934657] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.934659] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.934660] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.934662] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.934663] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.934665] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
[ 0.934667] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.934717] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.934719] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.934720] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.934722] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.934724] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.934725] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.934727] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.934729] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.935031] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.935033] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.936354] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.936356] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.936358] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.937156] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.946782] pnp: PnP ACPI: found 10 devices
[ 0.955289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.955301] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-39] add_size 1000
[ 0.955322] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.955324] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.955327] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.955330] pci 0000:00:1c.0: PCI bridge to [bus 01-39]
[ 0.955332] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.955336] pci 0000:00:1c.0: bridge window [mem 0xc4000000-0xda0fffff]
[ 0.955339] pci 0000:00:1c.0: bridge window [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.955344] pci 0000:00:1c.4: PCI bridge to [bus 3a]
[ 0.955349] pci 0000:00:1c.4: bridge window [mem 0xdc200000-0xdc2fffff]
[ 0.955355] pci 0000:00:1c.5: PCI bridge to [bus 3b]
[ 0.955359] pci 0000:00:1c.5: bridge window [mem 0xdc100000-0xdc1fffff]
[ 0.955366] pci 0000:00:1d.0: PCI bridge to [bus 3c]
[ 0.955368] pci 0000:00:1d.0: bridge window [io 0xe000-0xefff]
[ 0.955371] pci 0000:00:1d.0: bridge window [mem 0xdc000000-0xdc0fffff]
[ 0.955378] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.955380] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.955381] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.955382] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.955384] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.955385] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.955386] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.955387] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.955389] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.955390] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.955391] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.955392] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 0.955394] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 0.955395] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[ 0.955396] pci_bus 0000:00: resource 18 [mem 0x80000000-0xdfffffff window]
[ 0.955398] pci_bus 0000:00: resource 19 [mem 0xfd000000-0xfe7fffff window]
[ 0.955399] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.955400] pci_bus 0000:01: resource 1 [mem 0xc4000000-0xda0fffff]
[ 0.955402] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xc1ffffff 64bit pref]
[ 0.955403] pci_bus 0000:3a: resource 1 [mem 0xdc200000-0xdc2fffff]
[ 0.955405] pci_bus 0000:3b: resource 1 [mem 0xdc100000-0xdc1fffff]
[ 0.955408] pci_bus 0000:3c: resource 0 [io 0xe000-0xefff]
[ 0.955409] pci_bus 0000:3c: resource 1 [mem 0xdc000000-0xdc0fffff]
[ 1.013746] NET: Registered protocol family 2
[ 1.025795] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.025898] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.026005] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.026022] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.026043] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.053752] NET: Registered protocol family 1
[ 1.053772] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.054879] PCI: CLS 0 bytes, default 64
[ 1.054913] Unpacking initramfs...
[ 1.983961] Freeing initrd memory: 8620K (ffff88002f6d2000 - ffff88002ff3d000)
[ 1.997808] DMAR: ACPI device "device:64" under DMAR at fed91000 as 00:15.0
[ 1.997812] DMAR: ACPI device "device:65" under DMAR at fed91000 as 00:15.1
[ 1.997839] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.997842] software IO TLB [mem 0x63a0b000-0x67a0b000] (64MB) mapped at [ffff880063a0b000-ffff880067a0afff]
[ 1.997877] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 1.997878] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.997879] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.997880] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.997881] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.997881] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 1.997963] Scanning for low memory corruption every 60 seconds
[ 2.009938] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.021776] audit: initializing netlink subsys (disabled)
[ 2.021790] audit: type=2000 audit(1466111608.988:1): initialized
[ 2.022366] workingset: timestamp_bits=35 max_order=21 bucket_order=0
[ 2.022389] zbud: loaded
[ 2.053788] Key type big_key registered
[ 2.054663] Key type asymmetric registered
[ 2.054664] Asymmetric key parser 'x509' registered
[ 2.065839] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.065902] io scheduler noop registered
[ 2.065904] io scheduler deadline registered
[ 2.081807] io scheduler cfq registered (default)
[ 2.082481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.082485] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.082510] efifb: probing for efifb
[ 2.082522] efifb: framebuffer at 0x90000000, using 22500k, total 22500k
[ 2.082523] efifb: mode is 3200x1800x32, linelength=12800, pages=1
[ 2.082524] efifb: scrolling: redraw
[ 2.082525] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.094613] Console: switching to colour frame buffer device 400x112
[ 2.105501] fb0: EFI VGA frame buffer device
[ 2.105508] intel_idle: MWAIT substates: 0x11142120
[ 2.105509] intel_idle: v0.4.1 model 0x4E
[ 2.105751] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.105871] GHES: HEST is not enabled!
[ 2.105947] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 2.108597] Non-volatile memory driver v1.3
[ 2.108658] Linux agpgart interface v0.103
[ 2.129812] tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 2)
[ 2.226422] ahci 0000:00:17.0: version 3.0
[ 2.226595] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x0 impl SATA mode
[ 2.226597] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.227590] scsi host0: ahci
[ 2.227868] scsi host1: ahci
[ 2.228172] scsi host2: ahci
[ 2.228365] scsi host3: ahci
[ 2.228551] scsi host4: ahci
[ 2.228777] scsi host5: ahci
[ 2.229005] scsi host6: ahci
[ 2.229203] scsi host7: ahci
[ 2.229241] ata1: DUMMY
[ 2.229242] ata2: DUMMY
[ 2.229243] ata3: DUMMY
[ 2.229244] ata4: DUMMY
[ 2.229245] ata5: DUMMY
[ 2.229246] ata6: DUMMY
[ 2.229246] ata7: DUMMY
[ 2.229247] ata8: DUMMY
[ 2.229296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.229989] i8042: Warning: Keylock active
[ 2.232264] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.232295] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.232413] mousedev: PS/2 mouse device common for all mice
[ 2.232572] rtc_cmos 00:01: RTC can wake from S4
[ 2.233080] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.233170] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.233177] intel_pstate: Intel P-state driver initializing
[ 2.233483] intel_pstate: HWP enabled
[ 2.233487] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.233488] EFI Variables Facility v0.08 2004-May-17
[ 2.233718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.238266] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.313838] NET: Registered protocol family 10
[ 2.314472] microcode: CPU0 sig=0x406e3, pf=0x80, revision=0x82
[ 2.314526] microcode: CPU1 sig=0x406e3, pf=0x80, revision=0x82
[ 2.314541] microcode: CPU2 sig=0x406e3, pf=0x80, revision=0x82
[ 2.314587] microcode: CPU3 sig=0x406e3, pf=0x80, revision=0x82
[ 2.314679] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.314941] registered taskstats version 1
[ 2.314963] zswap: loaded using pool lzo/zbud
[ 2.323417] Key type encrypted registered
[ 2.323423] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.568345] Magic number: 4:598:247
[ 2.568405] acpi device:5d: hash matches
[ 2.568612] rtc_cmos 00:01: setting system clock to 2016-06-16 21:13:29 UTC (1466111609)
[ 2.568723] PM: Checking hibernation image partition /dev/nvme0n1p2
[ 2.997985] tsc: Refined TSC clocksource calibration: 2400.000 MHz
[ 2.997990] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
[ 3.055484] psmouse serio1: synaptics: queried max coordinates: x [..5666], y [..4734]
[ 3.086449] psmouse serio1: synaptics: queried min coordinates: x [1276..], y [1118..]
[ 3.150109] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3038, fw id: 2011643
[ 3.188251] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 3.191239] PM: Hibernation image not present or could not be loaded.
[ 3.192521] Freeing unused kernel memory: 1656K (ffffffff81d1b000 - ffffffff81eb9000)
[ 3.192523] Write protecting the kernel read-only data: 12288k
[ 3.193106] Freeing unused kernel memory: 1472K (ffff880001690000 - ffff880001800000)
[ 3.196239] Freeing unused kernel memory: 1080K (ffff880001af2000 - ffff880001c00000)
[ 3.198851] random: systemd urandom read with 17 bits of entropy available
[ 3.221224] systemd[1]: systemd 210 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP +APPARMOR)
[ 3.221446] systemd[1]: Detected architecture 'x86-64'.
[ 3.221450] systemd[1]: Running in initial RAM disk.
[ 3.221540] systemd[1]: Set hostname to <jarvis>.
[ 3.267921] systemd[1]: Expecting device dev-disk-by\x2duuid-994363fd\x2dc12c\x2d4c6c\x2d92e9\x2d85e8ac695cf9.device...
[ 3.267976] systemd[1]: Starting Timers.
[ 3.267995] systemd[1]: Reached target Timers.
[ 3.268014] systemd[1]: Starting -.slice.
[ 3.284594] systemd[1]: Created slice -.slice.
[ 3.284629] systemd[1]: Starting udev Kernel Socket.
[ 3.284675] systemd[1]: Listening on udev Kernel Socket.
[ 3.284696] systemd[1]: Starting udev Control Socket.
[ 3.284738] systemd[1]: Listening on udev Control Socket.
[ 3.284757] systemd[1]: Starting Journal Socket.
[ 3.284807] systemd[1]: Listening on Journal Socket.
[ 3.284828] systemd[1]: Starting Sockets.
[ 3.284844] systemd[1]: Reached target Sockets.
[ 3.284862] systemd[1]: Starting System Slice.
[ 3.285050] systemd[1]: Created slice System Slice.
[ 3.285078] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.285253] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.285359] systemd[1]: Starting dracut cmdline hook...
[ 3.285941] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.286562] systemd[1]: Starting Load Kernel Modules...
[ 3.287157] systemd[1]: Starting Entropy Daemon based on the HAVEGE algorithm...
[ 3.287765] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[ 3.288808] systemd[1]: Starting Journal Service...
[ 3.289487] systemd[1]: Starting Slices.
[ 3.289514] systemd[1]: Reached target Slices.
[ 3.289566] systemd[1]: Starting Setup Virtual Console...
[ 3.290318] systemd[1]: Starting Swap.
[ 3.290345] systemd[1]: Reached target Swap.
[ 3.290383] systemd[1]: Starting Local File Systems.
[ 3.290405] systemd[1]: Reached target Local File Systems.
[ 3.291005] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.291336] systemd[1]: Started Load Kernel Modules.
[ 3.294177] systemd[1]: Starting Apply Kernel Variables...
[ 3.294977] systemd[1]: Starting Create static device nodes in /dev...
[ 3.303528] systemd[1]: Started Create static device nodes in /dev.
[ 3.306352] systemd[1]: Started Apply Kernel Variables.
[ 3.321513] systemd[1]: Started Setup Virtual Console.
[ 3.337491] systemd[1]: Started Journal Service.
[ 3.392582] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 3.393517] ACPI: Lid Switch [LID0]
[ 3.393582] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.393636] ACPI: Power Button [PBTN]
[ 3.393686] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 3.393720] ACPI: Sleep Button [SBTN]
[ 3.393858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 3.393891] ACPI: Power Button [PWRF]
[ 3.417189] ACPI: bus type USB registered
[ 3.417214] usbcore: registered new interface driver usbfs
[ 3.417225] usbcore: registered new interface driver hub
[ 3.417245] usbcore: registered new device driver usb
[ 3.418201] [drm] Initialized drm 1.1.0 20060810
[ 3.418988] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.418999] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.420390] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 3.420406] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.420598] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.420601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.420603] usb usb1: Product: xHCI Host Controller
[ 3.420604] usb usb1: Manufacturer: Linux 4.7.0-rc3+ xhci-hcd
[ 3.420606] usb usb1: SerialNumber: 0000:00:14.0
[ 3.420793] hub 1-0:1.0: USB hub found
[ 3.420854] hub 1-0:1.0: 12 ports detected
[ 3.431174] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.431179] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.431217] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.431219] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.431220] usb usb2: Product: xHCI Host Controller
[ 3.431221] usb usb2: Manufacturer: Linux 4.7.0-rc3+ xhci-hcd
[ 3.431222] usb usb2: SerialNumber: 0000:00:14.0
[ 3.431358] hub 2-0:1.0: USB hub found
[ 3.431389] hub 2-0:1.0: 6 ports detected
[ 3.433675] usb: port power management may be unreliable
[ 3.443296] rtsx_pci 0000:3b:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 124
[ 3.446023] nvme nvme0: pci function 0000:3c:00.0
[ 3.466133] [drm] Memory usable by graphics device = 4096M
[ 3.466137] checking generic (90000000 15f9000) vs hw (90000000 10000000)
[ 3.466139] fb: switching to inteldrmfb from EFI VGA
[ 3.466169] Console: switching to colour dummy device 80x25
[ 3.466308] [drm] Replacing VGA console driver
[ 3.472388] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.472390] [drm] Driver supports precise vblank timestamp query.
[ 3.483646] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.486620] [drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
[ 3.522373] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.523458] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 3.523623] [drm] Initialized i915 1.6.0 20160606 for 0000:00:02.0 on minor 0
[ 3.558717] nvme0n1: p1 p2 p3 p4
[ 3.637844] raid6: sse2x1 gen() 9401 MB/s
[ 3.705801] raid6: sse2x1 xor() 7076 MB/s
[ 3.773813] raid6: sse2x2 gen() 11680 MB/s
[ 3.794008] fbcon: inteldrmfb (fb0) is primary device
[ 3.809865] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 3.841863] raid6: sse2x2 xor() 8088 MB/s
[ 3.909861] raid6: sse2x4 gen() 12267 MB/s
[ 3.977865] raid6: sse2x4 xor() 8869 MB/s
[ 4.045853] clocksource: Switched to clocksource tsc
[ 4.046009] raid6: avx2x1 gen() 14775 MB/s
[ 4.063189] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a
[ 4.063190] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.113785] raid6: avx2x2 gen() 14190 MB/s
[ 4.181782] raid6: avx2x4 gen() 13297 MB/s
[ 4.181783] raid6: using algorithm avx2x1 gen() 14775 MB/s
[ 4.181784] raid6: using avx2x2 recovery algorithm
[ 4.182084] xor: automatically using best checksumming function:
[ 4.221783] avx : 23187.000 MB/sec
[ 4.229796] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 4.417935] usb 1-4: New USB device found, idVendor=04f3, idProduct=20d0
[ 4.417938] usb 1-4: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 4.417939] usb 1-4: Product: Touchscreen
[ 4.417940] usb 1-4: Manufacturer: ELAN
[ 4.425772] usbcore: registered new interface driver usbhid
[ 4.425773] usbhid: USB HID core driver
[ 4.430145] Btrfs loaded, crc32c=crc32c-intel, assert=on
[ 4.430146] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 4.430147] BTRFS: selftest: sectorsize: 4096 nodesize: 8192
[ 4.430148] BTRFS: selftest: sectorsize: 4096 nodesize: 16384
[ 4.430148] BTRFS: selftest: sectorsize: 4096 nodesize: 32768
[ 4.430149] BTRFS: selftest: sectorsize: 4096 nodesize: 65536
[ 4.430534] BTRFS: device fsid 994363fd-c12c-4c6c-92e9-85e8ac695cf9 devid 1 transid 285184 /dev/nvme0n1p3
[ 4.585999] usb 1-5: new high-speed USB device number 4 using xhci_hcd
[ 4.822480] usb 1-5: New USB device found, idVendor=0bda, idProduct=5682
[ 4.822483] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 4.822485] usb 1-5: Product: Integrated_Webcam_HD
[ 4.822486] usb 1-5: Manufacturer: CKFEH41I373010052032
[ 4.822487] usb 1-5: SerialNumber: 200901010001
[ 4.826301] [drm] RC6 on
[ 5.220787] Console: switching to colour frame buffer device 400x112
[ 5.254231] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.310280] PM: Starting manual resume from disk
[ 5.310286] PM: Hibernation image partition 259:2 present
[ 5.310288] PM: Looking for hibernation image.
[ 5.310477] PM: Image not found (code -22)
[ 5.310481] PM: Hibernation image not present or could not be loaded.
[ 5.328116] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 5.328123] BTRFS info (device nvme0n1p3): has skinny extents
[ 5.341642] BTRFS info (device nvme0n1p3): detected SSD devices, enabling SSD mode
[ 5.562917] systemd-journald[140]: Received SIGTERM from PID 1 (systemd).
[ 5.734314] BTRFS info (device nvme0n1p3): disk space caching is enabled
[ 5.748429] random: nonblocking pool is initialized
[ 5.791088] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 5.792764] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 5.794587] ACPI: AC Adapter [AC] (on-line)
[ 5.797710] acpi INT33D5:00: intel-hid: created platform device
[ 5.799328] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20160422/nspredef-297)
[ 5.799342] ACPI: Invalid package element [0]: got number, expecting [R]
[ 5.799343] _ART package 0 is invalid, ignored
[ 5.799810] input: Intel HID events as /devices/platform/INT33D5:00/input/input8
[ 5.801922] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 5.818218] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 5.818532] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 5.834783] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 5.865043] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 5.872116] ACPI: Battery Slot [BAT0] (battery present)
[ 5.872297] wmi: Mapper loaded
[ 5.890821] thermal LNXTHERM:00: registered as thermal_zone6
[ 5.890825] ACPI: Thermal Zone [THM] (25 C)
[ 5.891031] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.891037] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ecc66e0), AE_NOT_FOUND (20160422/psparse-542)
[ 5.891224] Bluetooth: Core ver 2.21
[ 5.891235] NET: Registered protocol family 31
[ 5.891236] Bluetooth: HCI device and connection manager initialized
[ 5.891240] ACPI Error:
[ 5.891240] Bluetooth: HCI socket layer initialized
[ 5.891242] Bluetooth: L2CAP socket layer initialized
[ 5.891244] [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND
[ 5.891246] Bluetooth: SCO socket layer initialized
[ 5.891246] (20160422/psargs-359)
[ 5.891248] ACPI Error: Method parse/execution failed [\_TZ.TZ00._TMP] (Node ffff88027ecc66e0), AE_NOT_FOUND (20160422/psparse-542)
[ 5.891333] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.891337] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ecc6618), AE_NOT_FOUND (20160422/psparse-542)
[ 5.891409] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.891414] ACPI Error: Method parse/execution failed [\_TZ.TZ01._TMP] (Node ffff88027ecc6618), AE_NOT_FOUND (20160422/psparse-542)
[ 5.894140] Bluetooth: HCI UART driver ver 2.3
[ 5.894143] Bluetooth: HCI UART protocol H4 registered
[ 5.894144] Bluetooth: HCI UART protocol BCSP registered
[ 5.894145] Bluetooth: HCI UART protocol LL registered
[ 5.894146] Bluetooth: HCI UART protocol ATH3K registered
[ 5.894147] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.894182] Bluetooth: HCI UART protocol Intel registered
[ 5.894199] Bluetooth: HCI UART protocol BCM registered
[ 5.894200] Bluetooth: HCI UART protocol QCA registered
[ 5.895278] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.895289] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.895297] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ecc3f28), AE_NOT_FOUND (20160422/psparse-542)
[ 5.895305] acpi PNP0C0B:00: Failed to change power state to D0
[ 5.902113] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.902124] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.902132] ACPI Error: Method parse/execution failed [\_TZ.FN00._ON] (Node ffff88027ecc3f28), AE_NOT_FOUND (20160422/psparse-542)
[ 5.902143] acpi PNP0C0B:00: Failed to set initial power state
[ 5.913903] int3403 thermal: probe of INT3403:03 failed with error -22
[ 5.914282] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 5.925098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.937865] acpi PNP0C0B:00: Cannot transition from (unknown) to D3hot
[ 5.940626] AVX2 version of gcm_enc/dec engaged.
[ 5.940629] AES CTR mode by8 optimization enabled
[ 5.946286] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.946297] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.946305] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ecc3de8), AE_NOT_FOUND (20160422/psparse-542)
[ 5.946315] acpi PNP0C0B:01: Failed to change power state to D0
[ 5.954041] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.954053] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.954061] ACPI Error: Method parse/execution failed [\_TZ.FN01._ON] (Node ffff88027ecc3de8), AE_NOT_FOUND (20160422/psparse-542)
[ 5.954071] acpi PNP0C0B:01: Failed to set initial power state
[ 5.961156] Intel(R) Wireless WiFi driver for Linux
[ 5.961159] Copyright(c) 2003- 2015 Intel Corporation
[ 5.961236] iwlwifi 0000:3a:00.0: enabling device (0000 -> 0002)
[ 5.969910] acpi PNP0C0B:01: Cannot transition from (unknown) to D3hot
[ 5.976783] iwlwifi 0000:3a:00.0: Unsupported splx structure
[ 5.978047] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.978058] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.978067] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ecc3ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 5.978076] acpi PNP0C0B:02: Failed to change power state to D0
[ 5.986050] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 5.986062] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 5.986071] ACPI Error: Method parse/execution failed [\_TZ.FN02._ON] (Node ffff88027ecc3ca8), AE_NOT_FOUND (20160422/psparse-542)
[ 5.986082] acpi PNP0C0B:02: Failed to set initial power state
[ 5.987343] iwlwifi 0000:3a:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
[ 5.998859] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.005953] acpi PNP0C0B:02: Cannot transition from (unknown) to D3hot
[ 6.012285] iwlwifi 0000:3a:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.013945] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.014267] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.014275] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.014281] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ecc3b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.014288] acpi PNP0C0B:03: Failed to change power state to D0
[ 6.016605] iwlwifi 0000:3a:00.0: L1 Enabled - LTR Disabled
[ 6.018710] iTCO_vendor_support: vendor-support=0
[ 6.019867] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.019993] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 6.020530] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.022514] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.022521] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.022526] ACPI Error: Method parse/execution failed [\_TZ.FN03._ON] (Node ffff88027ecc3b68), AE_NOT_FOUND (20160422/psparse-542)
[ 6.022532] acpi PNP0C0B:03: Failed to set initial power state
[ 6.036875] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.037071] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.045864] acpi PNP0C0B:03: Cannot transition from (unknown) to D3hot
[ 6.054055] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.054067] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.054078] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ecc3a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.054092] acpi PNP0C0B:04: Failed to change power state to D0
[ 6.062230] ACPI Error: [\_SB_.PCI0.LPCB.H_EC.ECAV] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 6.062249] ACPI Error: Method parse/execution failed [\_TZ.FNCL] (Node ffff88027ecc6938), AE_NOT_FOUND (20160422/psparse-542)
[ 6.062262] ACPI Error: Method parse/execution failed [\_TZ.FN04._ON] (Node ffff88027ecc3a28), AE_NOT_FOUND (20160422/psparse-542)
[ 6.062272] acpi PNP0C0B:04: Failed to set initial power state
[ 6.077460] Adding 2096124k swap on /dev/nvme0n1p2. Priority:-1 extents:1 across:2096124k SSFS
[ 6.085925] acpi PNP0C0B:04: Cannot transition from (unknown) to D3hot
[ 6.086121] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.090739] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 6.093857] device-mapper: uevent: version 1.0.3
[ 6.105899] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 6.118587] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 6.118590] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.118592] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 6.118593] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.118594] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.118595] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 6.118597] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 6.118598] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 6.131070] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 6.132479] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 6.132556] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 6.132621] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[ 6.132681] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[ 6.153485] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.260234] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:04F3:20D0.0001/input/input15
[ 6.260462] hid-multitouch 0003:04F3:20D0.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-4/input0
[ 6.268445] input: DLL0704:01 06CB:76AE Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-8/i2c-DLL0704:01/0018:06CB:76AE.0002/input/input17
[ 6.268596] hid-multitouch 0018:06CB:76AE.0002: input,hidraw1: I2C HID v1.00 Mouse [DLL0704:01 06CB:76AE] on i2c-DLL0704:01
[ 6.504728] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 6.508800] audit: type=1305 audit(1466111613.433:2): audit_pid=867 old=0 auid=4294967295 ses=4294967295 res=1
[ 6.953612] Linux video capture interface: v2.00
[ 7.035106] usbcore: registered new interface driver btusb
[ 7.046804] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5682)
[ 7.050636] Bluetooth: hci0: read Intel version: 370810011003110e25
[ 7.050641] Bluetooth: hci0: Intel device is already patched. patch num: 25
[ 7.056328] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input19
[ 7.056555] usbcore: registered new interface driver uvcvideo
[ 7.056560] USB Video Class driver (1.1.1)
[ 7.064795] systemd-journald[378]: Received request to flush runtime journal from PID 1
[ 10.410397] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.410401] Bluetooth: BNEP filters: protocol multicast
[ 10.410405] Bluetooth: BNEP socket layer initialized
[ 10.431949] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.440205] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 10.466163] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 10.489884] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.603190] XFS (dm-0): Mounting V5 Filesystem
[ 10.622362] XFS (dm-0): Ending clean mount
[ 10.980649] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled
[ 10.980819] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled
[ 11.044784] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled
[ 11.044953] iwlwifi 0000:3a:00.0: L1 Disabled - LTR Disabled
[ 11.069482] NET: Registered protocol family 17
[ 14.662579] fuse init (API version 7.24)
\
 
 \ /
  Last update: 2016-06-17 00:21    [W:0.095 / U:1.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site