lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/4] mfd: cros_ec: Add cros_ec_cmd_xfer_status helper
On Thu, 02 Jun 2016, Brian Norris wrote:

> From: Tomeu Vizoso <tomeu.vizoso@collabora.com>
>
> So that callers of cros_ec_cmd_xfer don't have to repeat boilerplate
> code when checking for errors from the EC side.
>
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> Reviewed-by: Benson Leung <bleung@chromium.org>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v2: no change
>
> drivers/platform/chrome/cros_ec_proto.c | 15 +++++++++++++++
> include/linux/mfd/cros_ec.h | 18 ++++++++++++++++++
> 2 files changed, 33 insertions(+)
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index b6e161f71b26..ecc544c728f0 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -380,3 +380,18 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> return ret;
> }
> EXPORT_SYMBOL(cros_ec_cmd_xfer);
> +
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg)
> +{
> + int ret;
> +
> + ret = cros_ec_cmd_xfer(ec_dev, msg);
> + if (ret < 0)
> + dev_err(ec_dev->dev, "Command xfer error (err:%d)\n", ret);
> + else if (msg->result != EC_RES_SUCCESS)
> + return -EECRESULT - msg->result;
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(cros_ec_cmd_xfer_status);
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 64184d27e3cd..b1e48dfbf50a 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -40,6 +40,9 @@
> #define EC_MAX_REQUEST_OVERHEAD 1
> #define EC_MAX_RESPONSE_OVERHEAD 2
>
> +/* ec_command return value for non-success result from EC */
> +#define EECRESULT 1000
> +
> /*
> * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> */
> @@ -226,6 +229,21 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> struct cros_ec_command *msg);
>
> /**
> + * cros_ec_cmd_xfer_status - Send a command to the ChromeOS EC
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns succes

s/succes/success/

I guess whoever takes this patch can do a quick fix-up job on it, so:

Acked-by: Lee Jones <lee.jones@linaro.org>

> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * @ec_dev: EC device
> + * @msg: Message to write
> + * @return: Num. of bytes transferred on success, <0 on failure
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> * cros_ec_remove - Remove a ChromeOS EC
> *
> * Call this to deregister a ChromeOS EC, then clean up any private data.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-06-16 18:21    [W:0.123 / U:1.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site