lkml.org 
[lkml]   [2016]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 02/14] pwm: Add two helpers to ease relative duty cycle manipulation
Date
The PWM framework expects PWM users to configure the duty cycle in
nanoseconds, but most users just want to express this duty cycle
relatively to the period value (i.e. duty_cycle = 33% of the period).
Add the pwm_{get,set}_relative_duty_cycle() helpers to ease this kind
of conversion.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
---
include/linux/pwm.h | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)

diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index a100f6e..05e4ea4 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -181,6 +181,62 @@ static inline void pwm_init_state(const struct pwm_device *pwm,
}

/**
+ * pwm_get_relative_duty_cycle() - Get a relative duty_cycle value
+ * @state: PWM state to extract the duty_cycle from
+ * @scale: target scale of the relative duty cycle
+ *
+ * This functions converts the absolute duty_cycle stored in @state
+ * (expressed in nanosecond) into a value relative to the period.
+ * For example if you want to get the duty_cycle expressed in percent,
+ * call:
+ *
+ * pwm_get_state(pwm, &state);
+ * duty = pwm_get_relative_duty_cycle(&state, 100);
+ */
+static inline unsigned int
+pwm_get_relative_duty_cycle(const struct pwm_state *state, unsigned int scale)
+{
+ if (!state->period)
+ return 0;
+
+ return DIV_ROUND_CLOSEST_ULL((u64)state->duty_cycle * scale,
+ state->period);
+}
+
+/**
+ * pwm_set_relative_duty_cycle() - Set a relative duty_cycle value
+ * @state: PWM state to fill
+ * @duty_cycle: relative duty_cycle value
+ * @scale: scale in which @duty_cycle is expressed
+ *
+ * This functions converts a relative duty_cycle into an absolute one
+ * (expressed in nanoseconds), and put the result in state->duty_cycle.
+ *
+ * For example if you want to configure a 50% duty_cycle, call:
+ *
+ * pwm_init_state(pwm, &state);
+ * pwm_set_relative_duty_cycle(&state, 50, 100);
+ * pwm_apply_state(pwm, &state);
+ *
+ * This functions returns -EINVAL if @duty_cycle and/or @scale are
+ * inconsistent (@scale == 0 or @duty_cycle > @scale).
+ */
+static inline int
+pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle,
+ unsigned int scale)
+{
+ /* Make sure @scale is > 0 and @duty_cycle <= @scale */
+ if (!scale || duty_cycle > scale)
+ return -EINVAL;
+
+ state->duty_cycle = DIV_ROUND_CLOSEST_ULL((u64)duty_cycle *
+ state->period,
+ scale);
+
+ return 0;
+}
+
+/**
* struct pwm_ops - PWM controller operations
* @request: optional hook for requesting a PWM
* @free: optional hook for freeing a PWM
--
2.7.4
\
 
 \ /
  Last update: 2016-06-14 12:01    [W:0.166 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site