lkml.org 
[lkml]   [2016]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] net: Add MDIO bus driver for the Hisilicon FEMAC
From
Date


On 2016/6/13 21:32, Andrew Lunn wrote:
> On Mon, Jun 13, 2016 at 02:07:54PM +0800, Dongpo Li wrote:
>> This patch adds a separate driver for the MDIO interface of the
>> Hisilicon Fast Ethernet MAC.
>>
>> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
>> Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
>> ---
>> .../bindings/net/hisilicon-femac-mdio.txt | 22 +++
>> drivers/net/phy/Kconfig | 8 +
>> drivers/net/phy/Makefile | 1 +
>> drivers/net/phy/mdio-hisi-femac.c | 165 +++++++++++++++++++++
>> 4 files changed, 196 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
>> create mode 100644 drivers/net/phy/mdio-hisi-femac.c

[...]
>> +
>
> Hi Dongpo
>
> Overall this looks good. Just some minor comments
>
>> +static int hisi_femac_mdio_wait_ready(struct mii_bus *bus)
>> +{
>> + struct hisi_femac_mdio_data *data = bus->priv;
>
> You could just pass data here. Your read and write functions already
> have it.
>
Thank you, I will fix it in next patch version.

>> + data->clk = devm_clk_get(&pdev->dev, NULL);
>> + if (IS_ERR(data->clk)) {
>> + ret = -ENODEV;
>> + goto err_out_free_mdiobus;
>> + }
>
> Return the error which devm_clk_get() gives you.
>
ok, I will fix it.

>> +
>> + ret = clk_prepare_enable(data->clk);
>> + if (ret)
>> + goto err_out_free_mdiobus;
>> +
>> + ret = of_mdiobus_register(bus, np);
>> + if (ret)
>> + goto err_out_free_mdiobus;
>
> You leave the clock prepared and enabled on error.
>
ok, I will fix it.

> Andrew
>
> .
>

\
 
 \ /
  Last update: 2016-06-14 11:01    [W:1.732 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site