lkml.org 
[lkml]   [2016]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mmc: core: add auto bkops support
From
Date
On 13/06/16 11:58, Shawn Lin wrote:
> 在 2016/6/13 16:17, Adrian Hunter 写道:
>> On 13/06/16 10:48, Shawn Lin wrote:
>>> On 2016/6/13 14:29, Adrian Hunter wrote:
>>>> On 06/06/16 06:07, Shawn Lin wrote:
>>>>> JEDEC eMMC v5.1 introduce an autonomously initiated method
>>>>> for background operations.
>>>>>
>>>>> Host that wants to enable the device to perform background
>>>>> operations during device idle time, should signal the device
>>>>> by setting AUTO_EN in BKOPS_EN field EXT_CSD[163] to 1b. When
>>>>> this bit is set, the device may start or stop background operations
>>>>> whenever it sees fit, without any notification to the host.
>>>>>
>>>>> When AUTO_EN bit is set, the host should keep the device power
>>>>> active. The host may set or clear this bit at any time based on
>>>>> its power constraints or other considerations.
>>>>>
>>>>> Currently the manual bkops is only be used under the async req
>>>>> circumstances and it's a bit complicated to be controlled as the
>>>>> perfect method is that we should do some idle monitor just as rpm
>>>>> and send HPI each time if receiving rd/wr req. But it will impact
>>>>> performance significantly, especially for random iops since the
>>>>> weight of executing HPI against r/w small piece of LBAs is
>>>>> nonnegligible.
>>>>>
>>>>> So we now prefer to select the auto one unconditionally if supported
>>>>> which makes it as simple as possible. It should really good enough
>>>>> for devices to manage its internal policy for bkops rather than the
>>>>> host, which makes us believe that we could achieve the best
>>>>> performance for all the devices implementing auto bkops and the only
>>>>> thing we should do is to disable it when cutting off the power.
>>>>
>>>> Do you know if there is really a requirement to do that?
>>>
>>> Even without bkops enable, no matter for manual or auto one, FTL should
>>> always do bkops like GC internally when needed to guarantee the
>>> performance and balance the wear leveling. What I thought to do is to
>>> make it more explicitly.
>>>
>>> Because then, what
>>>> is the point of power off notification?
>>>
>>> When power off notification is sent, bkops will be stopped
>>> in _mmc_suspend. So I don't undertand your point here?
>>
>> I am trying to understand why we need to do anything for auto bkops.
>> Since AUTO_EN is persistent, we can leave the decision whether to turn it on
>> to whomever provisions the device. Then we just leave it alone.
>>
>
> Hrm..
>
> one possible way is to control it by mmc-utils on
> user space? So we should add a cmd for mmc-utils
> there?

That would be consistent with manual bkops.

\
 
 \ /
  Last update: 2016-06-13 15:01    [W:0.380 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site