lkml.org 
[lkml]   [2016]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: apm: Use lowercase consistently for hex constants
On Wed, Jun 8, 2016 at 12:48 PM, Rob Herring <robh@kernel.org> wrote:
> On Mon, Jun 06, 2016 at 03:17:56PM -0500, Bjorn Helgaas wrote:
>> The convention in these files is to use lowercase for "0x" prefixes and for
>> the hex constants themselves, but a few changes didn't follow that
>> convention, which makes the file annoying to read.
>>
>> Use lowercase consistently for the hex constants. No functional change
>> intended.
>>
>> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>> ---
>> .../devicetree/bindings/net/apm-xgene-enet.txt | 4 +-
>> arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 40 ++++++++++----------
>> arch/arm64/boot/dts/apm/apm-storm.dtsi | 36 +++++++++---------
>> 3 files changed, 40 insertions(+), 40 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> index 05f705e3..e41b2d5 100644
>> --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
>> @@ -59,8 +59,8 @@ Example:
>> compatible = "apm,xgene-enet";
>> status = "disabled";
>> reg = <0x0 0x17020000 0x0 0xd100>,
>> - <0x0 0X17030000 0x0 0X400>,
>> - <0x0 0X10000000 0x0 0X200>;
>> + <0x0 0x17030000 0x0 0x400>,
>> + <0x0 0x10000000 0x0 0x200>;
>> reg-names = "enet_csr", "ring_csr", "ring_cmd";
>> interrupts = <0x0 0x3c 0x4>;
>> port-id = <0>;
>> diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
>> index c569f76..9773687 100644
>> --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
>> +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
>> @@ -106,9 +106,9 @@
>> interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
>> ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
>> reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
>> - <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
>> - <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
>> - <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
>> + <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
>> + <0x0 0x780c0000 0x0 0x10000>, /* GIC VCPU Control */
>> + <0x0 0x780e0000 0x0 0x20000>; /* GIC VCPU */
>> v2m0: v2m@0x00000 {
>
> Unit addresses should not have '0x' or leading 0s.
>
>> compatible = "arm,gic-v2m-frame";
>> msi-controller;
>> @@ -159,35 +159,35 @@
>> msi-controller;
>> reg = <0x0 0x90000 0x0 0x1000>;
>> };
>> - v2m10: v2m@0xA0000 {
>> + v2m10: v2m@0xa0000 {
>
> and here...

Thanks, Bjorn. Will you have time to post another version that
addresses Rob's comment?

Hi Rob,

If you are fine, I will take these changes into my xgene-next tree for
the next DTS pull request for 4.8 (after your comment is addressed)

Regards,
Duc Dang.
>
> Rob

\
 
 \ /
  Last update: 2016-06-14 05:21    [W:0.071 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site