lkml.org 
[lkml]   [2016]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v5 0/2] Add a new Rockchip usb2 phy driver
    Date
    The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
    IP block than rk3288 and before, and most of phy-related registers are
    also different from the past, so a new phy driver is required necessarily.

    These series patches add phy-rockchip-inno-usb2.c and the corresponding
    documentation.

    Changes in v5:
    - Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.

    Changes in v4:
    - Used 'phy-supply' instead of 'vbus_*-supply'.

    Changes in v3:
    - Supplemented some hardware-description into the devicetree bindings.
    - Resolved the mapping defect between fixed value in driver and the property
    in devicetree.
    - Code cleanup.

    Changes in v2:
    - Specified more hardware-description into the devicetree bindings.
    - Optimized some process of driver.

    Frank Wang (2):
    Documentation: bindings: add DT documentation for Rockchip USB2PHY
    phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

    .../bindings/phy/phy-rockchip-inno-usb2.txt | 64 ++
    drivers/phy/Kconfig | 7 +
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-rockchip-inno-usb2.c | 645 ++++++++++++++++++++
    4 files changed, 717 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
    create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

    --
    1.7.9.5


    \
     
     \ /
      Last update: 2016-06-13 04:41    [W:2.931 / U:0.232 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site