lkml.org 
[lkml]   [2016]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/48] clk: at91: replace usleep() by udelay() calls
On Sat, 11 Jun 2016 00:03:04 +0200
Alexandre Belloni <alexandre.belloni@free-electrons.com> wrote:

> From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>
> Fix the main and slow clock .prepare() implementations which used to call
> usleep() when the scheduler wasn't ready yet.
>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Cc: linux-clk@vger.kernel.org
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> drivers/clk/at91/clk-main.c | 2 +-
> drivers/clk/at91/clk-slow.c | 6 +++---
> 2 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
> index 58b5baca670c..12c5062aeb92 100644
> --- a/drivers/clk/at91/clk-main.c
> +++ b/drivers/clk/at91/clk-main.c
> @@ -342,7 +342,7 @@ static int clk_main_probe_frequency(struct regmap *regmap)
> regmap_read(regmap, AT91_CKGR_MCFR, &mcfr);
> if (mcfr & AT91_PMC_MAINRDY)
> return 0;
> - usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT);
> + udelay(MAINF_LOOP_MIN_WAIT);
> } while (time_before(prep_time, timeout));
>
> return -ETIMEDOUT;
> diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
> index 61090b1146cf..612e893ce994 100644
> --- a/drivers/clk/at91/clk-slow.c
> +++ b/drivers/clk/at91/clk-slow.c
> @@ -76,7 +76,7 @@ static int clk_slow_osc_prepare(struct clk_hw *hw)
>
> writel(tmp | AT91_SCKC_OSC32EN, sckcr);
>
> - usleep_range(osc->startup_usec, osc->startup_usec + 1);
> + udelay(osc->startup_usec);

If you're using udelay() you should probably move the code in
->prepare() into ->enable(). The same goes for the following changes.

>
> return 0;
> }
> @@ -195,7 +195,7 @@ static int clk_slow_rc_osc_prepare(struct clk_hw *hw)
>
> writel(readl(sckcr) | AT91_SCKC_RCEN, sckcr);
>
> - usleep_range(osc->startup_usec, osc->startup_usec + 1);
> + udelay(osc->startup_usec);
>
> return 0;
> }
> @@ -304,7 +304,7 @@ static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index)
>
> writel(tmp, sckcr);
>
> - usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1);
> + udelay(SLOWCK_SW_TIME_USEC);
>
> return 0;
> }



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-06-11 10:21    [W:0.404 / U:22.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site