lkml.org 
[lkml]   [2016]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 23/48] ARM: dts: at91: at91sam9n12: TC blocks are also simple-mfd and syscon devices
Date
Add simple-mfd and syscon to the TC blocks to allow to register one of the
channels as clocksource properly at boot time. It also allows to use regmap
instead of tclib.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 95569a87b6c9..1f26cb66238e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -430,7 +430,9 @@
};

tcb0: timer@f8008000 {
- compatible = "atmel,at91sam9x5-tcb";
+ compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb_clk>, <&clk32k>;
@@ -438,7 +440,9 @@
};

tcb1: timer@f800c000 {
- compatible = "atmel,at91sam9x5-tcb";
+ compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb_clk>, <&clk32k>;
--
2.8.1
\
 
 \ /
  Last update: 2016-06-11 00:21    [W:0.461 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site