lkml.org 
[lkml]   [2016]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/6] mtd: nand: gpmi: document the new supported chip in DT
Date
listed all supported chips in DT.

Signed-off-by: Han Xu <han.xu@nxp.com>
---
Documentation/devicetree/bindings/mtd/gpmi-nand.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index c8d0e2f..ed48f69 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -4,7 +4,8 @@ The GPMI nand controller provides an interface to control the
NAND flash chips.

Required properties:
- - compatible : should be "fsl,<chip>-gpmi-nand"
+ - compatible : should be "fsl,<chip>-gpmi-nand", the chip should be imx23,
+ imx28, imx6q, imx6qp, imx6sx, imx6ul or imx7d.
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- interrupts : BCH interrupt number.
--
1.9.1
\
 
 \ /
  Last update: 2016-06-10 20:21    [W:0.112 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site