lkml.org 
[lkml]   [2016]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] ARM: dts: sun7i: Enable NAND on Wexler TAB7200
On Thu, Jun 09, 2016 at 11:11:00AM +0300, Aleksei Mamlin wrote:
> On Thu, 9 Jun 2016 00:03:14 +0200
> Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
>
> > Hi,
> >
> > On Mon, Jun 06, 2016 at 01:24:24PM +0300, Aleksei Mamlin wrote:
> > > Enable the NFC and describe the NAND flash connected to this controller.
> > >
> > > Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
> > > ---
> > > arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 41 ++++++++++++++++++++++++++
> > > 1 file changed, 41 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > index 2f6b21a..42aff91 100644
> > > --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
> > > @@ -159,6 +159,47 @@
> > > status = "okay";
> > > };
> > >
> > > +&nfc {
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&nand_pins_a>, <&nand_cs0_pins_a>, <&nand_rb0_pins_a>;
> > > + status = "okay";
> > > +
> > > + nand@0 {
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > + reg = <0>;
> > > + allwinner,rb = <0>;
> > > +
> > > + nand-ecc-mode = "hw";
> > > + nand-on-flash-bbt;
> > > +
> > > + boot0@0 {
> > > + label = "boot0";
> > > + reg = /bits/ 64 <0x0 0x200000>;
> > > + };
> > > +
> > > + boot0-rescue@200000 {
> > > + label = "boot0-rescue";
> > > + reg = /bits/ 64 <0x200000 0x200000>;
> > > + };
> > > +
> > > + uboot@400000 {
> > > + label = "uboot";
> > > + reg = /bits/ 64 <0x400000 0x200000>;
> > > + };
> > > +
> > > + uboot-rescue@600000 {
> > > + label = "uboot-rescue";
> > > + reg = /bits/ 64 <0x600000 0x200000>;
> > > + };
> > > +
> > > + main@800000 {
> > > + label = "main";
> > > + reg = /bits/ 64 <0x800000 0xff800000>;
> > > + };
> > > + };
> > > +};
> >
> > This feels a bit premature. The two boards you're using have an MLC
> > NAND which is not supported yet. Until there's proper MLC support in
> > the kernel, I'm not sure we want to enable that for end-users when we
> > know that things will get wrong.
> >
> > However, after discussing this with Boris, I appreciate that we don't
> > have any example available because of this policy for people that want
> > to opt-in anyway.
> >
> > What we could do is to still mark the status as disabled in the DTS,
> > with a big fat warning as comment just before, so that it requires
> > user action, and that user will have been warned.
> >
> > Would that work for you?
> > Maxime
> >
>
> Let's drop this two patches with boards dts changes until we get proper MLC
> support in kernel.
>
> As for examples - I'll update linux-sunxi wiki with how to enable NAND
> controller and describe NAND chips in DTS. People who want to add NAND support
> to their boards will be warned that it is risky for now.

That works for me too.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-06-10 11:21    [W:0.055 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site