lkml.org 
[lkml]   [2016]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Kernel] [PATCH v2 4/5] ARM: dts: omap5: describe control for ckobuffer
From
Date
On 05/09/2016 03:32 PM, Peter Ujfalusi wrote:
> On 05/09/16 15:10, Peter Ujfalusi wrote:
>
>>>> finally I found some time to apply your patches. Sorry for the long time.
>>>>
>>>> Unfortunately, it does not work. Neither on omap5evm nor on our omap5 hardware.
>>>> I get no sound on the twl6040 - just white noise (which can be controlled in
>>>> level through
>>>> amixer so it is created on the digital input side of the twl6040).
>>>>
>>>> So I think your patch is missing a detail compared to my simple solution.
>>>
>>> Did you implement anything on the audio driver side? The audio driver must
>>> enable the clock implemented by this patch.
>>
>> I did, can test it in 10 minutes or so...
>
> might work, but linux-next is not booting on omap5-uevm :o I don't know why...
>
> In any case I have attached the 3 patches I have for this, including Tero's
> ported to linux-next.
>
> Patch 3 might need to be done per board probably, but this should be good for
> testing.

Please ignore these patches, I got HPPLL mode working, I need to clean the
patches up first and I will send it for testing tomorrow.

--
Péter

\
 
 \ /
  Last update: 2016-05-09 22:01    [W:0.090 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site