lkml.org 
[lkml]   [2016]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 5/5] vf610-soc: Add Vybrid SoC device tree binding documentation
On 2016-05-09 10:14, Rob Herring wrote:
> On Thu, May 5, 2016 at 3:27 AM, <maitysanchayan@gmail.com> wrote:
>> Hello Rob,
>>
>> On 16-05-03 21:30:26, Rob Herring wrote:
>>> On Mon, May 02, 2016 at 12:35:04PM +0530, Sanchayan Maity wrote:
>>> > Add device tree binding documentation for Vybrid SoC.
>>> >
>>> > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
>>> > ---
>>> > .../bindings/arm/freescale/fsl,vf610-soc.txt | 35 ++++++++++++++++++++++
>>> > 1 file changed, 35 insertions(+)
>>> > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
>>> >
>>> > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
>>> > new file mode 100644
>>> > index 0000000..bdd95e8
>>> > --- /dev/null
>>> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
>>> > @@ -0,0 +1,35 @@
>>> > +Vybrid System-on-Chip
>>> > +---------------------
>>> > +
>>> > +Required properties:
>>> > +
>>> > +- #address-cells: must be 1
>>> > +- #size-cells: must be 1
>>> > +- compatible: "fsl,vf610-soc-bus", "simple-bus"
>>>
>>> If this is a bus, put the file in bindings/bus/...
>>
>> The fsl,vf610-soc-bus binding is used to bind the driver in question with
>> an appropriate compatible node.
>>
>> Basically being a standalone platform driver, there was need of a compatible
>> property to bind on. Introducing a separate device tree node for it's sake
>> didn't seem appropriate so the alteration to SoC node's compatible.
>
> Ah, so you are designing a node around the needs of a Linux specific
> driver. Don't do that. DT describes the h/w and this node is not a h/w
> block.
>
> Create a platform device based on a matching SOC compatible string
> instead and make your driver find the information it needs directly
> from the relevant nodes like the ROM node.

That reads like my words a year ago:
https://lkml.org/lkml/2015/5/22/408

Initially pretty much everything was hard-coded in the driver.

Arnd then pushed to use more descriptive in the device tree.

Of course, we should not end up making up relations which are not there
in hardware. We need to find the right balance.

Here is my suggestion:
1. Add "fsl,vf610-soc-bus" as compatible string to the soc node, use it
to bind the "soc bus driver" as a platform driver located in driver/soc/
2. Add ROM as syscon device (it is not erasable ROM memory, hence eeprom
seems not to be appropriate)
3. In the new soc bus driver, search for the relevant nodes using
hardcoded strings:
- "ocrom" to get the syscon device, read the ROM revision with the
hardcoded offset
- "ocotp" to get the NVMEM device or "cfg0"/"cfg1" to the cells
directly, read the values using the defined cells.
- "mscm_cpucfg" is already there as a syscon device

Arnd, Rob, does that sound reasonable?

--
Stefan


\
 
 \ /
  Last update: 2016-05-09 20:41    [W:0.078 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site