lkml.org 
[lkml]   [2016]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 16/21] net: dsa: mv88e6xxx: factorize GLOBAL_MONITOR_CONTROL setup
Date
All switch drivers configure the GLOBAL_MONITOR_CONTROL register with
slightly changes.

Assume the setup of the upstream port, and configure it as the port to
which ingress and egress and ARP monitor frames are to be sent.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
drivers/net/dsa/mv88e6123.c | 14 --------------
drivers/net/dsa/mv88e6131.c | 13 -------------
drivers/net/dsa/mv88e6171.c | 15 ---------------
drivers/net/dsa/mv88e6352.c | 14 --------------
drivers/net/dsa/mv88e6xxx.c | 12 ++++++++++++
5 files changed, 12 insertions(+), 56 deletions(-)

diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
index 1cd30ac..5df06d8 100644
--- a/drivers/net/dsa/mv88e6123.c
+++ b/drivers/net/dsa/mv88e6123.c
@@ -54,20 +54,6 @@ static const char *mv88e6123_drv_probe(struct device *dsa_dev,
static int mv88e6123_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- u32 upstream_port = dsa_upstream_port(ds);
- int ret;
- u32 reg;
-
- /* Configure the upstream port, and configure the upstream
- * port as the port to which ingress and egress monitor frames
- * are to be sent.
- */
- reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
- if (ret)
- return ret;

/* Disable remote management for now, and set the switch's
* DSA device number.
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 1c3b245..c8e3974 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -61,20 +61,7 @@ static const char *mv88e6131_drv_probe(struct device *dsa_dev,
static int mv88e6131_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- u32 upstream_port = dsa_upstream_port(ds);
int ret;
- u32 reg;
-
- /* Disable ARP mirroring, and configure the upstream port as
- * the port to which ingress and egress monitor frames are to
- * be sent.
- */
- reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
- GLOBAL_MONITOR_CONTROL_ARP_DISABLED;
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
- if (ret)
- return ret;

/* Disable cascade port functionality unless this device
* is used in a cascade configuration, and set the switch's
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 6c8554c..a848aef 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -61,21 +61,6 @@ static const char *mv88e6171_drv_probe(struct device *dsa_dev,
static int mv88e6171_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- u32 upstream_port = dsa_upstream_port(ds);
- int ret;
- u32 reg;
-
- /* Configure the upstream port, and configure the upstream
- * port as the port to which ingress and egress monitor frames
- * are to be sent.
- */
- reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT;
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
- if (ret)
- return ret;

/* Disable remote management for now, and set the switch's
* DSA device number.
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index a27616c..e098870 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -80,20 +80,6 @@ static const char *mv88e6352_drv_probe(struct device *dsa_dev,
static int mv88e6352_setup_global(struct dsa_switch *ds)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- u32 upstream_port = dsa_upstream_port(ds);
- int ret;
- u32 reg;
-
- /* Configure the upstream port, and configure the upstream
- * port as the port to which ingress and egress monitor frames
- * are to be sent.
- */
- reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
- ret = mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
- if (ret)
- return ret;

/* Disable remote management for now, and set the switch's
* DSA device number.
diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c
index f1cd660..27551c1 100644
--- a/drivers/net/dsa/mv88e6xxx.c
+++ b/drivers/net/dsa/mv88e6xxx.c
@@ -2922,6 +2922,8 @@ int mv88e6xxx_setup_ports(struct dsa_switch *ds)

static int mv88e6xxx_setup_global(struct mv88e6xxx_priv_state *ps)
{
+ struct dsa_switch *ds = ps->ds;
+ u32 upstream_port = dsa_upstream_port(ds);
u16 reg;
int err;
int i;
@@ -2938,6 +2940,16 @@ static int mv88e6xxx_setup_global(struct mv88e6xxx_priv_state *ps)
if (err)
return err;

+ /* Configure the upstream port, and configure it as the port to which
+ * ingress and egress and ARP monitor frames are to be sent.
+ */
+ reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
+ upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
+ upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
+ err = _mv88e6xxx_reg_write(ps, REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
+ if (err)
+ return err;
+
/* Set the default address aging time to 5 minutes, and
* enable address learn messages to be sent to all message
* ports.
--
2.8.2
\
 
 \ /
  Last update: 2016-05-09 19:41    [W:0.151 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site