lkml.org 
[lkml]   [2016]   [May]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] usb: dwc3: usb/dwc3: fake dissconnect event when turn off pullup
Date

Hi,

Peter Chen <hzpeterchen@gmail.com> writes:
>> "Du, Changbin" <changbin.du@intel.com> writes:
>> > Hi, Balbi,
>> >
>> > The step to reproduce this issue is:
>> > 1) connect device to a host and wait its enumeration.
>> > 2) trigger software disconnect by calling function
>> > usb_gadget_disconnect(), which finally call
>> > dwc3_gadget_pullup(false). Do not reconnect device
>> > (I mean no enumeration go on, keep bit Run/Stop 0.).
>> >
>> > At here, gadget driver's disconnect callback should be
>> > Called, right? We has been disconnected. But no, as
>> > You said " not generating disconnect IRQ after you
>> > drop Run/Stop is expected".
>> >
>> > And I am testing on an Android device, Android only
>> > use dwc3_gadget_pullup(false) to issue a soft disconnection.
>> > This confused user that the UI still show usb as connected
>> > State, caused by missing a disconnect event.
>>
>> okay, so I know what this is. This is caused by Android gadget itself
>> not notifying the gadget that a disconnect has happened. Just look at
>> udc-core's soft_connect implementation for the sysfs interface, and
>> you'll see what I mean.
>>
>> This should be fixed at Android gadget itself. The only thing we could
>> do is introduce a new usb_gadget_soft_connect()/disconnect() to wrap the
>> logic so it's easier for Android gadget to use; but even that I'm a
>> little bit reluctant to do because Android should be using our
>> soft_connect interface instead of reimplementing it (wrongly) by its
>> own.
>>
>
> If it is a gadget driver, it can call its disconnect explicitly.
> Another thing is the gadget driver should not call usb_gadget_disconnect
> directly, it should call usb_gadget_deactivate or usb_function_deactivate.
>
> Since currently, calling usb_gadget_disconnect may not do real pull down
> dp, Felipe, will you consider adding gadget_driver->disconnect into
> usb_gadget_disconnect after pull down dp?

this is the detail that I'm not yet entirely sure is always valid. Would
there ever be a situation where we want to drop pull-ups but not tell
the gadget about it ? I'm not sure. Anybody wants to investigate ?
Otherwise I'll add it to my TODO list.

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-05-06 09:21    [W:0.094 / U:4.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site