lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 09/11] serial: 8250_lpss: move Quark code from PCI driver
From
Date
On Wed, 2016-05-04 at 16:14 +0100, Bryan O'Donoghue wrote:
> On Wed, 2016-05-04 at 17:32 +0300, Andy Shevchenko wrote:
> >
> > Intel Quark has DesignWare UART. Move the code from 8250_pci to
> > 8250_lpss.
> >
> > Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> >  drivers/tty/serial/8250/8250_lpss.c | 11 +++++++++++
> >  drivers/tty/serial/8250/8250_pci.c  | 15 +--------------
> >  2 files changed, 12 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/tty/serial/8250/8250_lpss.c
> > b/drivers/tty/serial/8250/8250_lpss.c
> > index 77cf7e3..3beb3aa 100644
> > --- a/drivers/tty/serial/8250/8250_lpss.c
> > +++ b/drivers/tty/serial/8250/8250_lpss.c
> > @@ -25,6 +25,8 @@
> >  #define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
> >  #define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
> >  
> > +#define PCI_DEVICE_ID_INTEL_QRK_UARTx 0x0936
> > +
> >  #define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
> >  #define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
> >  
> > @@ -165,6 +167,9 @@ static int lpss8250_dma_setup(struct lpss8250
> > *lpss, struct uart_8250_port *port
> >   struct dw_dma_slave *rx_param, *tx_param;
> >   struct device *dev = port->port.dev;
> >  
> > + if (!lpss->dma_param.dma_dev)
> > + return 0;
> > +
> >   rx_param = devm_kzalloc(dev, sizeof(*rx_param),
> > GFP_KERNEL);
> >   if (!rx_param)
> >   return -ENOMEM;
> > @@ -252,6 +257,11 @@ static const struct lpss8250_board byt_board =
> > {
> >   .setup = byt_serial_setup,
> >  };
> >  
> > +static const struct lpss8250_board qrk_board = {
> > + .freq = 44236800,
> > + .base_baud = 2764800,
> > +};
> > +
> >  #define LPSS_DEVICE(id, board) { PCI_VDEVICE(INTEL, id),
> > (kernel_ulong_t)&board }
> >  
> >  static const struct pci_device_id pci_ids[] = {
> > @@ -259,6 +269,7 @@ static const struct pci_device_id pci_ids[] = {
> >   LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART2, byt_board),
> >   LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART1, byt_board),
> >   LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART2, byt_board),
> > + LPSS_DEVICE(PCI_DEVICE_ID_INTEL_QRK_UARTx, qrk_board),
> >   LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART1, byt_board),
> >   LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART2, byt_board),
> >   { },
> > diff --git a/drivers/tty/serial/8250/8250_pci.c
> > b/drivers/tty/serial/8250/8250_pci.c
> > index bb4df5d..b94b1ee 100644
> > --- a/drivers/tty/serial/8250/8250_pci.c
> > +++ b/drivers/tty/serial/8250/8250_pci.c
> > @@ -1765,7 +1765,6 @@ pci_wch_ch38x_setup(struct serial_private
> > *priv,
> >  #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022
> >  #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
> >  #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e
> > -#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936
> >  
> >  #define PCI_VENDOR_ID_SUNIX 0x1fd4
> >  #define PCI_DEVICE_ID_SUNIX_1999 0x1999
> > @@ -2736,7 +2735,6 @@ enum pci_board_num_t {
> >   pbn_ADDIDATA_PCIe_4_3906250,
> >   pbn_ADDIDATA_PCIe_8_3906250,
> >   pbn_ce4100_1_115200,
> > - pbn_qrk,
> >   pbn_omegapci,
> >   pbn_NETMOS9900_2s_115200,
> >   pbn_brcm_trumanage,
> > @@ -3512,12 +3510,6 @@ static struct pciserial_board pci_boards[] =
> > {
> >   .base_baud = 921600,
> >   .reg_shift      = 2,
> >   },
> > - [pbn_qrk] = {
> > - .flags = FL_BASE0,
> > - .num_ports = 1,
> > - .base_baud = 2764800,
> > - .reg_shift = 2,
> > - },
> >   [pbn_omegapci] = {
> >   .flags = FL_BASE0,
> >   .num_ports = 8,
> > @@ -3634,6 +3626,7 @@ static const struct pci_device_id blacklist[]
> > =
> > {
> >   { PCI_VDEVICE(INTEL, 0x0f0c), },
> >   { PCI_VDEVICE(INTEL, 0x228a), },
> >   { PCI_VDEVICE(INTEL, 0x228c), },
> > + { PCI_VDEVICE(INTEL, 0x0936), },
> >   { PCI_VDEVICE(INTEL, 0x9ce3), },
> >   { PCI_VDEVICE(INTEL, 0x9ce4), },
> >  };
> > @@ -5303,12 +5296,6 @@ static struct pci_device_id serial_pci_tbl[]
> > =
> > {
> >   pbn_ce4100_1_115200 },
> >  
> >   /*
> > -  * Intel Quark x1000
> > -  */
> > - { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART,
> > - PCI_ANY_ID, PCI_ANY_ID, 0, 0,
> > - pbn_qrk },
> > - /*
> >    * Cronyx Omega PCI
> >    */
> >   { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA,
> Andy.
>
> Could you please add CONFIG_SERIAL_8250_LPSS when
>  CONFIG_X86_INTEL_QUARK is true for my "Reviewed-by" to this patch ?
>
> I don't see that

Wait, what you are proposing here is a new behaviour, right?
Or can you explain how it works now (w/o this series being applied)?

--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

\
 
 \ /
  Last update: 2016-05-04 18:01    [W:0.042 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site