lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/9] add i2c driver supported for rk3399
Date
There are two points differert from others:
- new method to caculate i2c timings for rk3399
- pclk and function clk are separated at rk3399

David Wu (9):
i2c: rk3x: add documentation to fields in "struct rk3x_i2c"
i2c: rk3x: use struct "rk3x_i2c_calced_timings"
i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd()
i2c: rk3x: Move setting STATE_START and add STATE_SETUP
i2c: rk3x: Change SoC data to not use array
i2c: rk3x: Move spec timing data to "static const" structs
dt-bindings: i2c: rk3x: add support for rk3399
i2c: rk3x: add i2c support for rk3399 soc
i2c: rk3x: support fast-mode plus for rk3399

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +-
drivers/i2c/busses/i2c-rk3x.c | 482 +++++++++++++++++----
2 files changed, 419 insertions(+), 79 deletions(-)

--
1.9.1


\
 
 \ /
  Last update: 2016-05-04 16:41    [W:0.167 / U:3.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site