[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 09/18] ASoC: sti: Update DT example to match the driver code
hello Arnd, peter,

On 04/26/2016 01:44 PM, Arnd Bergmann wrote:
> On Tuesday 26 April 2016 12:15:32 Peter Griffin wrote:
>>>> If not what would you recommend instead?
>>> It's still not clear to me what that bit in the syscfg register
>>> is for. Given the error message about "sti-audio-clk-glue",
>>> I suspect that this is actually a clock controller and that
>>> it should be using the clock binding with a separate driver
>>> instead of manipulating the regmap directly from the audio driver.
>> Luckily I do have the datasheet for the audio-glue sysconf register.
>> It says: -
>> [11:8] PCM_CLK_SEL: Selects the frequency synthesizer clock or the external
>> PCM clock for each channel.
>> The driver only ever sets this to 1 which selects the frequency synthesizer
>> clock. So the bitfield of the register which the driver is using (PCM_CLK_SEL)
>> is a clock mux.
> Ok, that sounds like it could be either a really simple clock driver
> with just a few lines, or integrated into an existing clock driver
> if you already have one for this syscon node.
> Arnd
FYI, Name of this glue is related to the register name. But it does not
concern only clock...
This glue register is used to :
- select clock source ( clock framework or external clock from GPIO)
=> one bit field per IP instance (player->clk_sel)
- select uniperiph player IP instance for PCM out.


 \ /
  Last update: 2016-05-04 10:21    [W:0.074 / U:7.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site