lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 0/8] Add MT8173 Video Encoder Driver and VPU Driver
From
Date
Hi Tiffany,

On 05/03/2016 12:11 PM, Tiffany Lin wrote:
> ==============
> Introduction
> ==============
>
> The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
> Mediatek Video Codec is able to handle video encoding of in a range of formats.
>
> This patch series also include VPU driver. Mediatek Video Codec driver rely on VPU driver to load,
> communicate with VPU.
>
> Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI both have been merged in v4.6-rc1.
> This patch series need [PATCH v15 8/8] memory: mtk-smi: export mtk_smi_larb_get/put[1] to build as module
>
> [1]http://lists.infradead.org/pipermail/linux-mediatek/2016-April/005173.html
>
> ==================
> Device interface
> ==================
>
> In principle the driver bases on v4l2 memory-to-memory framework:
> it provides a single video node and each opened file handle gets its own private context with separate
> buffer queues. Each context consist of 2 buffer queues: OUTPUT (for source buffers, i.e. raw video
> frames) and CAPTURE (for destination buffers, i.e. encoded video frames).
>
> ==============================
> VPU (Video Processor Unit)
> ==============================
> The VPU driver for hw video codec embedded in Mediatek's MT8173 SOCs.
> It is able to handle video decoding/encoding in a range of formats.
> The driver provides with VPU firmware download, memory management and the communication interface between CPU and VPU.
> For VPU initialization, it will create virtual memory for CPU access and physical address for VPU hw device access.
> When a decode/encode instance opens a device node, vpu driver will download vpu firmware to the device.
> A decode/encode instant will decode/encode a frame using VPU interface to interrupt vpu to handle decoding/encoding jobs.
>
> Please have a look at the code and comments will be very much appreciated.
>
> Change in v10:
> 1. Fix smatch/sparse error message
> 2. Add depends on ARM || ARM64 and MTK_IOMMU in Kconfig

I don't like the ARM or ARM64 dependency since that makes COMPILE_TEST harder.

I removed it here and for the VPU and everything still compiles fine with
sparse and smatch. So I'll drop those dependencies.

Why is the MTK_IOMMU dependency needed? Just curious.

Note that sparse still complains about this:

media-git/drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c:261:24: warning: incorrect type in assignment (different base types)

I think this code should be rewritten. Something like this would work
(if I understand the code correctly):

u32 tag = (bs_hdr_len << 5) | 0x10 | not_key;

ac_tag[0] = tag & 0xff;
ac_tag[1] = (tag >> 8) & 0xff;
ac_tag[2] = (tag >> 16) & 0xff;

It's perhaps a bit more verbose, but a lot easier to understand.

I'm accepting this driver but I'll remove the ARM || ARM64 dependency. Can
you post a follow-up patch for this sparse warning?

Regards,

Hans


>
> VPU part
> 1. Fix smatch/sparse error message
> 2. Use totalram_pages instead of max_pfn to decide VPU 4GB mode
> 3. Protect variable "fw_load"
> 4. Add depends on ARM || ARM64 in Kconfig
>
> Change in v9:
> 1. Rename idx in mtk_vcodec_ctx to id and curr_max_idx in mtk_vcodec_dev to id_counter.
> 2. Refine fops_vcodec_open
>
> VPU part
> Merge Julia Lawall's fixes to "[PATCH v9 2/8] [media] VPU: mediatek: support Mediatek VPU"
> 1.[PATCH] VPU: mediatek: fix simple_open.cocci warnings
> 2.[PATCH] VPU: mediatek: fix platform_no_drv_owner.cocci warnings
>
> Change in v8:
> 1. Refine indentation
> 2. Refine colorspace information process vidioc_try_fmt_vid_out_mplane
> 3. Remove instance_mask in mtk_vcodec_dev, use curr_max_idx for instance index
> 4. Use kzalloc to allocate ctx
> 5. Refine fops_vcodec_open
>
> VPU Part
> 1. Refine vpu_load_firmware
>
> Change in v7:
> 1. Rebase against the master branch of git://linuxtv.org/media_tree.git
> 2. Add ycbcr_enc, quantization and xfer_func in try_fmt, g_fmt, s_fmt
> 3. Merge h264_enc and vp8_enc to venc directory
>
> Change in v6:
> 1. Add synchronization access protect between irq handler and work thread
> 2. Add DMA_ATTR_ALLOC_SINGLE_PAGES support
> 3. S_FMT will return coded_width, coded_height, so user space could allocate correct size memory that HW required
> 4. merge h264/vp8 enc ap and md32 ipi msg
> 5. separate h264/vp8 enc gop_size and intra_period handle
> 6. remove sizeimage relative code in work buffer function
> 7. Refine makefile to build as an module
> 8. Code clean up
>
> VPU Part
> 1. export symbols for building VPU as an module
> 2. change function from "wait_event_interruptible_timeout" to "wait_event_timeout" since
> CPU needs to wait for ACK from VPU even if it was interrupted by a signal
>
> v4l2-compliance test output:
> localhost Encode # ./v4l2-compliance -d /dev/video1
> Driver Info:
> Driver name : mtk-vcodec-enc
> Card type : platform:mt8173
> Bus info : platform:mt8173
> Driver version: 4.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video1 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 12 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
>
>
> v4l2-compliance test output:
> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
>
> Change in v5:
> Vcodec Part
> 1. Pass checkpatch and v4l2-compliance test
> 2. Remove unused g/s_selection for now
> 3. add vidioc_g_parm support
> 4. add vidioc_create_bufs and vidioc_prepare_buf support
> 5. Remove instance check in fops_vcodec_open
> 6. Fix comments for data structure and code
> 7. Refine venc, venc_lt clock source name in devicetree and binding document
> 8. Fix Author information and copyright information
> 9. Refine code according to review comments
>
> VPU Part
>
> v4l2-compliance test output:
> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
> Driver Info:
> Driver name : mtk-vcodec-enc
> Card type : platform:mt8173
> Bus info : platform:mt8173
> Driver version: 4.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video1 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 12 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
>
> Total: 38, Succeeded: 38, Failed: 0, Warnings: 0
>
>
> Change in v4:
> Vcodec Part
> 1. Remove MTK_ENCODE_PARAM_SKIP_FRAME support
> 2. Remove MTK_ENCODE_PARAM_FRAME_TYPE and change to use V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME[3]
> 3. Refine Encoder HW clock source
> 4. Refine debug log
> 5. Add watchdog support
> 6. With patch "media: v4l2-compat-ioctl32: fix missing length copy in put_v4l2_buffer32"[4],
> v4l2-compliance test passed[5] in v4.4-rc5
>
> VPU Part
> 1. These two patches were Acked-by: Rob Herring <robh <at> kernel.org> in v3
> [PATCH v3 1/8] dt-bindings: Add a binding for Mediatek Video Processor
> [PATCH v3 3/8] arm64: dts: mediatek: Add node for Mediatek Video Processor Unit
> Because we were wrong about how the hardware works, there is no connection between VPU and IOMMU HW
> We remove VPU attaching to IOMMU
> 2. Support VPU running on 4GB DRAM system
> 3. Support VPU watchdog reset
> 4. Refine for coding style
>
> [3]https://patchwork.linuxtv.org/patch/32670/
> [4] https://patchwork.linuxtv.org/patch/32631/
> [5]localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1
> Driver Info:
> Driver name : mtk-vcodec-en
> Card type : platform:mt817
> Bus info : platform:mt817
> Driver version: 4.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video1 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 12 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> warn: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(475):
> VIDIOC_CREATE_BUFS not supported
> warn: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(475):
> VIDIOC_CREATE_BUFS not supported
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Total: 38, Succeeded: 38, Failed: 0, Warnings: 2
>
> Change in v3:
> 1.Refine code to pass v4l2-compliance test, now it still has 2 issues 2.Refine code according to latest MTK
> IOMMU patches[1] 3.Remove MFC51 specific CIDs and add MTK specific CIDs for for keyframe and
> skip I-frame
> 4.Refine code according to review comments
>
> Below is the v1.6 version v4l2-compliance report for the mt8173 encoder driver.
> Now there are still 2 test fail in v1.6.
> For VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF, we directly use v4l2_m2m_ioctl_* functions, but it still
> fail. It pass in kernel 3.18 but fail in kernel 4.4.
> We will try v1.8 in next version.
> VIDIOC_EXPBUF is becuase we support all three memory types VB2_DMABUF, VB2_MMAP and VB2_USERPTR.
> VIDIOC_EXPBUF only allowed when only VB2_MMAP supported.
> localhost ~ # /usr/bin/v4l2-compliance -d /dev/video1 Driver Info:
> Driver name : mtk-vcodec-en
> Card type : platform:mt817
> Bus info : platform:mt817
> Driver version: 4.4.0
> Capabilities : 0x84204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04204000
> Video Memory-to-Memory Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video1 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls:
> test VIDIOC_QUERYCTRL/MENU: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 11 Private Controls: 2
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(266): vp->length
> == 0
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(335):
> buf.check(Unqueued, i)
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(420):
> testQueryBuf(node, i, q.g_buffers())
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
> fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(500): q.has_expbuf(node)
> test VIDIOC_EXPBUF: FAIL
> Total: 38, Succeeded: 36, Failed: 2, Warnings: 0
>
> Change in v2:
> Vcodec Part
> 1.Remove common and include directory in mtk-vcodec 2.Refine vb2ops_venc_start_streaming and
> vb2ops_venc_stop_streaming and state machine 3.Remove venc_if_init and venc_if_deinit 4.Refine
> debug message 5.Refine lab and vpu decription in mediatek-vcodec.txt
>
> VPU Part
> 1. Modify VPU Kconfig
> 2. Move encoder header files to other patch sets 3. Remove marcos for extended virtual/iova address 4.
> Change register and variable names 5. Add a reference counter for VPU watchdog 6. Remove one busy waiting
> in function vpu_ipi_send 7. Operate VPU clock in VPU driver (not called by encoder drivers) 8. Refine
> memory mapping, firmware download and extended memory allocation/free functions 9. Release more
> allocated resources in driver remove function
>
> Andrew-CT Chen (3):
> dt-bindings: Add a binding for Mediatek Video Processor
> VPU: mediatek: support Mediatek VPU
> arm64: dts: mediatek: Add node for Mediatek Video Processor Unit
>
> Tiffany Lin (5):
> dt-bindings: Add a binding for Mediatek Video Encoder
> vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver
> vcodec: mediatek: Add Mediatek VP8 Video Encoder Driver
> vcodec: mediatek: Add Mediatek H264 Video Encoder Driver
> arm64: dts: mediatek: Add Video Encoder for MT8173
>
> .../devicetree/bindings/media/mediatek-vcodec.txt | 59 +
> .../devicetree/bindings/media/mediatek-vpu.txt | 31 +
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 62 +
> drivers/media/platform/Kconfig | 32 +
> drivers/media/platform/Makefile | 4 +
> drivers/media/platform/mtk-vcodec/Makefile | 19 +
> drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h | 338 +++++
> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 1288 ++++++++++++++++++++
> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h | 58 +
> .../media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 454 +++++++
> .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 137 +++
> .../media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h | 26 +
> .../media/platform/mtk-vcodec/mtk_vcodec_intr.c | 55 +
> .../media/platform/mtk-vcodec/mtk_vcodec_intr.h | 27 +
> .../media/platform/mtk-vcodec/mtk_vcodec_util.c | 94 ++
> .../media/platform/mtk-vcodec/mtk_vcodec_util.h | 87 ++
> .../media/platform/mtk-vcodec/venc/venc_h264_if.c | 679 +++++++++++
> .../media/platform/mtk-vcodec/venc/venc_vp8_if.c | 481 ++++++++
> drivers/media/platform/mtk-vcodec/venc_drv_base.h | 62 +
> drivers/media/platform/mtk-vcodec/venc_drv_if.c | 113 ++
> drivers/media/platform/mtk-vcodec/venc_drv_if.h | 163 +++
> drivers/media/platform/mtk-vcodec/venc_ipi_msg.h | 210 ++++
> drivers/media/platform/mtk-vcodec/venc_vpu_if.c | 237 ++++
> drivers/media/platform/mtk-vcodec/venc_vpu_if.h | 61 +
> drivers/media/platform/mtk-vpu/Makefile | 3 +
> drivers/media/platform/mtk-vpu/mtk_vpu.c | 950 +++++++++++++++
> drivers/media/platform/mtk-vpu/mtk_vpu.h | 162 +++
> 27 files changed, 5892 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> create mode 100644 Documentation/devicetree/bindings/media/mediatek-vpu.txt
> create mode 100644 drivers/media/platform/mtk-vcodec/Makefile
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.h
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_pm.h
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_intr.h
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_util.h
> create mode 100644 drivers/media/platform/mtk-vcodec/venc/venc_h264_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/venc/venc_vp8_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_base.h
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_drv_if.h
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_ipi_msg.h
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_vpu_if.c
> create mode 100644 drivers/media/platform/mtk-vcodec/venc_vpu_if.h
> create mode 100644 drivers/media/platform/mtk-vpu/Makefile
> create mode 100644 drivers/media/platform/mtk-vpu/mtk_vpu.c
> create mode 100644 drivers/media/platform/mtk-vpu/mtk_vpu.h
>

\
 
 \ /
  Last update: 2016-05-04 10:01    [W:0.118 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site