lkml.org 
[lkml]   [2016]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] coresight: etmv4: Fix ETMv4x peripheral ID table
Date
This patch cleans up the peripheral id table for different ETMv4
implementations.

As per Cortex-A53 TRM, the ETM has following id values:

Peripheral ID0 0x5D 0xFE0
Peripheral ID1 0xB9 0xFE4
Peripheral ID2 0x4B 0xFE8
Peripheral ID3 0x00 0xFEC

where, PID2: has the following format:

[7:4] Revision
[3] JEDEC 0b1 res1. Indicates a JEP106 identity code is used
[2:0] DES_1 0b011 ARM Limited. This is bits[6:4] of JEP106 ID code

The existing table entry checks only the bits [1:0], which is not
sufficient enough. Fix it to match bits [3:0], just like the other
entries do. While at it, correct the comment for A57 and the A53 entry.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
---
drivers/hwtracing/coresight/coresight-etm4x.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 462f0dc..88947f3 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -815,12 +815,12 @@ err_arch_supported:
}

static struct amba_id etm4_ids[] = {
- { /* ETM 4.0 - Qualcomm */
- .id = 0x0003b95d,
- .mask = 0x0003ffff,
+ { /* ETM 4.0 - Cortex-A53 */
+ .id = 0x000bb95d,
+ .mask = 0x000fffff,
.data = "ETM 4.0",
},
- { /* ETM 4.0 - Juno board */
+ { /* ETM 4.0 - Cortex-A57 */
.id = 0x000bb95e,
.mask = 0x000fffff,
.data = "ETM 4.0",
--
1.9.1
\
 
 \ /
  Last update: 2016-05-31 14:21    [W:0.068 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site