lkml.org 
[lkml]   [2016]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] Re: [PATCH] ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
From
Date
Am 30.05.2016 um 21:43 schrieb Maxime Ripard:
> Hi,
>
> On Mon, May 30, 2016 at 08:30:13PM +0800, luoyi.ly@gmail.com wrote:
>> From: luoyi <luoyi.ly@gmail.com>
>>
>> Add support for the Bananapi M1 Plus A20 development board from sinovoip.com.cn .
>> This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
>> OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
>> 3.5 mm jack for stero sound out, on board microphone, 40 gpio pins and sdio wifi.
> What is the difference between the M1+ and the M1?

The M1+ is an updated version of the original Banana Pi. If you're
interested
in the details, have a look at http://linux-sunxi.org/Banana_Pi#Variants .
"BPi-M1+" is SinoVoip's counterpart of LeMaker's "Banana Pro", for which
a .dts
already exists. Judging from .fex files, only a single pin assignment
seems to
differ between the two (audio_pa_ctrl, PH26 vs. PH15).

Regards, B. Nortmann

\
 
 \ /
  Last update: 2016-05-30 22:41    [W:0.088 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site