lkml.org 
[lkml]   [2016]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
    On 30/05/16 15:29, Neil Armstrong wrote:
    > Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
    > It differs from the meson6/meson8b HW, so need for a separate driver.
    > The HW provides a divider capable of having a 1ms timebase thus simplifying
    > the counter update.
    > The restart call is not provided even if the HW is capable of triggering a
    > system reset immediately because of the PSCI firmare having such functionnality.
    > The watchdog is not expected to be running at boot time since there is a separate
    > system-level watchdog running from the SCPI co-processor, but this case would be
    > handle in a next driver update.
    >
    > Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@baylibre.com :
    > - Remove status callback, will re-introduce it later to managed the already-running use case
    > - Fix registers defines indentation
    > - Fix space between operators
    > - Make all callbacks static functions
    > - Fix bindings with missing clocks attribute
    > - Do not stop/start watchdog on a timeout setup
    > - Fix probe device configuration
    >
    > Neil Armstrong (3):
    > watchdog: Add Meson GXBB Watchdog Driver
    > dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
    > ARM64: dts: amlogic: meson-gxbb: Add watchdog node

    I'm missing [PATCH 2/3]

    --
    Carlo Caione

    \
     
     \ /
      Last update: 2016-05-30 16:01    [W:3.083 / U:0.220 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site