lkml.org 
[lkml]   [2016]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] usb: xhci-mtk: fixup mouse wakeup failure during system suspend
Date

Hi,

chunfeng yun <chunfeng.yun@mediatek.com> writes:
>> chunfeng yun <chunfeng.yun@mediatek.com> writes:
>> > On Thu, 2016-04-21 at 10:04 +0800, Chunfeng Yun wrote:
>> >> Click mouse after xhci suspend completion but before system suspend
>> >> completion, system will not be waken up by mouse if the duration of
>> >> them is larger than 20ms which is the device UFP's resume signaling
>>
>> what is "them" here ? The duration of what is longer than 20ms ?
> They are "xhci suspend completion" and "system suspend completion";
>
> It's time duration

okay. So if xhci suspend takes longer than 20ms your SPM doesn't see a
wakeup ?

>> >> lasted. Another reason is that the SPM is not enabled before system
>>
>> what's SPM ?
> It is System Power Management which is powered off when system is
> running in normal mode, and is powered on when system enters suspend
> mode. It is used to wakeup system when some wakeup sources, such as
> bluetooth or powerkey etc, tigger wakeup event.

okay, thanks

>> >> suspend compeltion, this causes SPM also not notice the resume signal.
>> ^^^^^^^^^^
>> completion
>>
>> >> So in order to reduce the duration less than 20ms, make use of
>> >> syscore's suspend/resume interface.
>>
>> no, this is the wrong approach
> But it seems only one workable approach from software side

I wouldn't say that. It seems to me SPM should be enabled earlier.

>> >> Because the syscore runs on irq disabled context, and xhci's
>> >> suspend/resume calls some sleeping functions, enable local irq
>> >> and then disable it during suspend/resume. This may be not a problem,
>> >> since only boot CPU is runing.
>>
>> another problem :) calling local_irq_{enable,disable}() is an indication
>> that something's wrong.
> Oh!
>
> BTW: There will be warning logs if they are not called.

yeah, I got that :-) But it's still wrong to use
local_irq_{enable,disable}() the way you're using them :-)

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-05-03 12:01    [W:0.084 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site