lkml.org 
[lkml]   [2016]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 5/5] usb: dwc3: rockchip: add devicetree bindings documentation
From
Date
Hello.

On 5/27/2016 2:31 PM, William Wu wrote:

> This patch documents the device tree documentation required for

Documents the documentation? :-)

> Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.

Consisting?

> It could operate in device mode (SS, HS, FS) and host
> mode (SS, HS, FS, LS).
>
> Signed-off-by: William Wu <william.wu@rock-chips.com>
> ---
> Changes in v3:
> - add dwc3 address (Felipe)
>
> Changes in v2:
> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)
>
>
> .../devicetree/bindings/usb/rockchip,dwc3.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> new file mode 100644
> index 0000000..0bb52fe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
> @@ -0,0 +1,45 @@
> +Rockchip SuperSpeed DWC3 USB SoC controller
> +
> +Required properties:
> +- compatible: should contain "rockchip,dwc3"
> +- clocks: A list of phandle + clock-specifier pairs for the
> + clocks listed in clock-names
> +- clock-names: Should contain the following:
> + "clk_usb3otg0_ref" Controller reference clk
> + "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
> + "aclk_usb3" Master/Core clock, have to be >= 62.5 MHz for SS operation
> +
> +
> +Optional clocks:
> + "aclk_usb3otg0" Aclk for specific usb controller clock.
> + "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all platforms.
> + "aclk_usb3_grf" USB grf clock. Not present on all platforms.
> +
> +Required child node:
> +A child node must exist to represent the core DWC3 IP block. The name of
> +the node is not important. The content of the node is defined in dwc3.txt.
> +
> +Phy documentation is provided in the following places:

PHY.

[...]

MBR, Sergei

\
 
 \ /
  Last update: 2016-05-27 14:21    [W:0.055 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site