lkml.org 
[lkml]   [2016]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk
Date
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit,
which specifies whether disable delay PHY power change
from P0 to P1/P2/P3 when link state changing from U0
to U1/U2/U3 respectively.

Signed-off-by: William Wu <william.wu@rock-chips.com>
---
Changes in v3:
- None

Changes in v2:
- None

Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 7 +++++++
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/platform_data.h | 1 +
4 files changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 34d13a5..bd5bef0 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -42,6 +42,8 @@ Optional properties:
- snps,dis_u2_freeclk_exists_quirk: when set, clear the u2_freeclk_exists
in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
a free-running PHY clock.
+ - snps,dis_del_phy_power_chg_quirk: when set core will change PHY power
+ from P0 to P1/P2/P3 without delay.
- snps,phyif_utmi_quirk: when set core will set phyif UTMI+ interface.
- snps,phyif_utmi: the value to configure the core to support a UTMI+ PHY
with an 8- or 16-bit interface. Value 0 select 8-bit
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index d99c170..c06870c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -451,6 +451,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u3_susphy_quirk)
reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;

+ if (dwc->dis_del_phy_power_chg_quirk)
+ reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE;
+
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);

reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -920,6 +923,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,dis_rxdet_inp3_quirk");
dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev,
"snps,dis_u2_freeclk_exists_quirk");
+ dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev,
+ "snps,dis_del_phy_power_chg_quirk");

dwc->phyif_utmi_quirk = device_property_read_bool(dev,
"snps,phyif_utmi_quirk");
@@ -960,6 +965,8 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->dis_rxdet_inp3_quirk = pdata->dis_rxdet_inp3_quirk;
dwc->dis_u2_freeclk_exists_quirk =
pdata->dis_u2_freeclk_exists_quirk;
+ dwc->dis_del_phy_power_chg_quirk =
+ pdata->dis_del_phy_power_chg_quirk;

dwc->phyif_utmi_quirk = pdata->phyif_utmi_quirk;
if (pdata->phyif_utmi)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index e1fcae8..abed84f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -780,6 +780,8 @@ struct dwc3_scratchpad_array {
* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
* in GUSB2PHYCFG, specify that USB2 PHY doesn't
* provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
* @phyif_utmi_quirk: set if we enable phyif UTMI+ quirk
* @phyif_utmi: UTMI+ PHY interface value
* 0 - 8 bits
@@ -928,6 +930,7 @@ struct dwc3 {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;

unsigned phyif_utmi_quirk:1;
unsigned phyif_utmi:1;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index b521565..ab45d91 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -44,6 +44,7 @@ struct dwc3_platform_data {
unsigned dis_enblslpm_quirk:1;
unsigned dis_rxdet_inp3_quirk:1;
unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;

unsigned phyif_utmi_quirk:1;
unsigned phyif_utmi:1;
--
1.9.1

\
 
 \ /
  Last update: 2016-05-27 13:41    [W:0.050 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site