lkml.org 
[lkml]   [2016]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] thermal: Add support for hardware-tracked trip points

On 2016年05月26日 00:42, Javi Merino wrote:
> Hi Caesar,
>
> On Wed, May 25, 2016 at 11:47:45AM +0800, Caesar Wang wrote:
>> From: Sascha Hauer <s.hauer@pengutronix.de>
>>
>> This adds support for hardware-tracked trip points to the device tree
>> thermal sensor framework.
>>
>> The framework supports an arbitrary number of trip points. Whenever
>> the current temperature is updated, the trip points immediately
>> below and above the current temperature are found. A .set_trips
>> callback is then called with the temperatures. If there is no trip
>> point above or below the current temperature, the passed trip
>> temperature will be -INT_MAX or INT_MAX respectively. In this callback,
>> the driver should program the hardware such that it is notified
>> when either of these trip points are triggered. When a trip point
>> is triggered, the driver should call `thermal_zone_device_update'
>> for the respective thermal zone. This will cause the trip points
>> to be updated again.
>>
>> If .set_trips is not implemented, the framework behaves as before.
>>
>> This patch is based on an earlier version from Mikko Perttunen
>> <mikko.perttunen@kapsi.fi>
>>
>> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
>> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
>> Cc: Zhang Rui <rui.zhang@intel.com>
>> Cc: Eduardo Valentin <edubezval@gmail.com>
>> Cc: linux-pm@vger.kernel.org
>>
>> ---
>>
>> Changes in v3:
>> - as Javi comments on https://patchwork.kernel.org/patch/9001281/.
>> - add the lock for preventing the called from multi placce
>> - add the note for pre_low/high_trip.
>>
>> Changes in v2:
>> - update the sysfs-api.txt for set_trips.
>>
>> Documentation/thermal/sysfs-api.txt | 7 +++++
>> drivers/thermal/thermal_core.c | 52 +++++++++++++++++++++++++++++++++++++
>> include/linux/thermal.h | 7 +++++
>> 3 files changed, 66 insertions(+)
>>
>> diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
>> index efc3f3d..75d8838 100644
>> --- a/Documentation/thermal/sysfs-api.txt
>> +++ b/Documentation/thermal/sysfs-api.txt
>> @@ -49,6 +49,9 @@ temperature) and throttle appropriate devices.
>> .bind: bind the thermal zone device with a thermal cooling device.
>> .unbind: unbind the thermal zone device with a thermal cooling device.
>> .get_temp: get the current temperature of the thermal zone.
>> + .set_trips: set the trip points window. Whenever the current temperature
>> + is updated, the trip points immediately below and above the
>> + current temperature are found.
>> .get_mode: get the current mode (enabled/disabled) of the thermal zone.
>> - "enabled" means the kernel thermal management is enabled.
>> - "disabled" will prevent kernel thermal driver action upon trip points
>> @@ -95,6 +98,10 @@ temperature) and throttle appropriate devices.
>> get_temp: a pointer to a function that reads the
>> sensor temperature. This is mandatory
>> callback provided by sensor driver.
>> + set_trips: a pointer to a function that sets a
>> + temperature window. When this window is
>> + left the driver must inform the thermal
>> + core via thermal_zone_device_update.
>> get_trend: a pointer to a function that reads the
>> sensor temperature trend.
>> set_emul_temp: a pointer to a function that sets
>> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
>> index 5133cd1..e5bfbd3 100644
>> --- a/drivers/thermal/thermal_core.c
>> +++ b/drivers/thermal/thermal_core.c
>> @@ -520,6 +520,51 @@ exit:
>> }
>> EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
>>
>> +static void thermal_zone_set_trips(struct thermal_zone_device *tz)
>> +{
>> + int low = -INT_MAX;
>> + int high = INT_MAX;
>> + int trip_temp, hysteresis;
>> + int temp = tz->temperature;
>> + int i, ret;
>> +
>> + if (!tz->ops->set_trips)
>> + return;
>> +
>> + for (i = 0; i < tz->trips; i++) {
>> + int trip_low;
>> +
>> + tz->ops->get_trip_temp(tz, i, &trip_temp);
>> + tz->ops->get_trip_hyst(tz, i, &hysteresis);
>> +
>> + trip_low = trip_temp - hysteresis;
>> +
>> + if (trip_low < temp && trip_low > low)
>> + low = trip_low;
>> +
>> + if (trip_temp > temp && trip_temp < high)
>> + high = trip_temp;
>> + }
>> +
>> + /* No need to change trip points */
>> + if (tz->prev_low_trip == low && tz->prev_high_trip == high)
>> + return;
>> +
>> + tz->prev_low_trip = low;
>> + tz->prev_high_trip = high;
>> +
>> + dev_dbg(&tz->device, "new temperature boundaries: %d < x < %d\n",
>> + low, high);
>> +
>> + /*
>> + * Set a temperature window. When this window is left the driver
>> + * must inform the thermal core via thermal_zone_device_update.
>> + */
>> + ret = tz->ops->set_trips(tz, low, high);
>> + if (ret)
>> + dev_err(&tz->device, "Failed to set trips: %d\n", ret);
> In the v2 review
> (http://article.gmane.org/gmane.linux.documentation/38442) you agreed
> to add locking but you haven't done it. Maybe you sent the wrong
> version?

My god!
Yep, I remember to change it. Somehow why ...

Thanks Javi for looking over it.

Hoping the next version is the final version.:-)

-Caesar

>
> Cheers,
> Javi
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip


--
caesar wang | software engineer | wxt@rock-chip.com


\
 
 \ /
  Last update: 2016-05-26 02:41    [W:0.091 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site