lkml.org 
[lkml]   [2016]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] brcmfmac: fix setting AP channel with new firmwares
From
Date


On 24-05-16 11:09, Rafał Miłecki wrote:
> Firmware for new chipsets is based on a new major version of code
> internally maintained at Broadcom. E.g. brcmfmac4366b-pcie.bin (used for
> BCM4366B1) is based on 10.10.69.3309 while brcmfmac43602-pcie.ap.bin was
> based on 7.35.177.56.
>
> Currently setting AP 5 GHz channel doesn't work reliably with BCM4366B1.
> When setting e.g. 36 control channel with VHT80 (center channel 42)
> firmware may randomly pick one of:
> 1) 52 control channel with 58 as center one
> 2) 100 control channel with 106 as center one
> 3) 116 control channel with 122 as center one
> 4) 149 control channel with 155 as center one
>
> It seems new firmwares require setting AP mode (BRCMF_C_SET_AP) before
> specifying a channel. Changing an order of firmware calls fixes the
> problem.
>
> This fix was verified with BCM4366B1 and tested for regressions on
> BCM43602. It's unclear if it's needed (or correct at all) for P2P
> interfaces so it leaves this code unaffected.

In doing so the code reads a bit awkward so if P2P-GO works with the
changed order that would be preferable.

> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> ---
> .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 16 ++++++++++++----
> 1 file changed, 12 insertions(+), 4 deletions(-)

\
 
 \ /
  Last update: 2016-05-25 23:21    [W:0.078 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site