lkml.org 
[lkml]   [2016]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] Documentation: dtb: xgene: Add hwmon dts binding documentation
On Mon, May 23, 2016 at 06:01:14PM -0700, Hoan Tran wrote:
> Hi Rob,
>
> Thanks for your review !
>
> On Mon, May 23, 2016 at 1:30 PM, Rob Herring <robh@kernel.org> wrote:
> >
> > On Mon, May 16, 2016 at 09:17:25AM -0700, Hoan Tran wrote:
> > > This patch adds the APM X-Gene hwmon device tree node documentation.
> > >
> > > Signed-off-by: Hoan Tran <hotran@apm.com>
> > > ---
> > > .../devicetree/bindings/hwmon/apm-xgene-hwmon.txt | 14 ++++++++++++++
> > > 1 file changed, 14 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
> > > new file mode 100644
> > > index 0000000..49a482e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
> > > @@ -0,0 +1,14 @@
> > > +APM X-Gene hwmon driver
> > > +
> > > +Hwmon driver accesses sensors over the "SLIMpro" mailbox.
> >
> > DT bindings describe h/w, not driver data.
> How about this description: "APM X-Gene SOC sensors are accessed over
> the "SLIMpro" mailbox" ?
> > I'm not sure this belongs in
> > DT and perhaps the devices for the mailbox should be created by the
> > mailbox driver.
> I don't think the current mailbox supports it.

Then add it. The mailbox binding is really only needed when other h/w
blocks use a mailbox. As this is purely a firmware interface then the
mailbox driver can create any devices it needs. The devices don't have
to be in DT to be created.

Rob

\
 
 \ /
  Last update: 2016-05-25 19:41    [W:3.061 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site