lkml.org 
[lkml]   [2016]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/4] soc: Add SoC driver for Freescale Vybrid platform
Hello Rob,

On 16-05-23 16:18:13, Rob Herring wrote:
> On Fri, May 20, 2016 at 03:32:05PM +0530, Sanchayan Maity wrote:
> > This adds a SoC driver to be used by Freescale Vybrid SoC's.
> > Driver utilises syscon and nvmem consumer API's to get the
> > various register values needed and expose the SoC specific
> > properties via sysfs.
> >
> > A sample output from Colibri Vybrid VF61 is below:
> >
> > root@colibri-vf:~# cd /sys/bus/soc/devices/soc0
> > root@colibri-vf:/sys/bus/soc/devices/soc0# ls
> > family machine power revision soc_id subsystem uevent
> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat family
> > Freescale Vybrid VF610
> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat machine
> > Freescale Vybrid
> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat revision
> > 00000013
> > root@colibri-vf:/sys/bus/soc/devices/soc0# cat soc_id
> > df6472a6130f29d4
> >
> > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> > ---
> > .../bindings/arm/freescale/fsl,vf610-soc.txt | 20 +++
> > drivers/soc/Kconfig | 1 +
> > drivers/soc/fsl/Kconfig | 10 ++
> > drivers/soc/fsl/Makefile | 1 +
> > drivers/soc/fsl/soc-vf610.c | 198 +++++++++++++++++++++
> > 5 files changed, 230 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
> > create mode 100644 drivers/soc/fsl/Kconfig
> > create mode 100644 drivers/soc/fsl/soc-vf610.c
> >
> > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
> > new file mode 100644
> > index 0000000..338905d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-soc.txt
> > @@ -0,0 +1,20 @@
> > +Vybrid System-on-Chip
> > +---------------------
> > +
> > +Required properties:
> > +
> > +- compatible: "fsl,vf610-soc"
> > +- rom-revision: phandle to the on-chip ROM node
> > +- mscm: phandle to the MSCM CPU configuration node
> > +- nvmem-cells: phandles to two OCOTP child nodes ocotp_cfg0 and ocotp_cfg1
> > +- nvmem-cell-names: should contain string names "cfg0" and "cfg1"
>
> I still have similar concerns as the discussion on the last version.
> This version only proves that you aren't describing h/w, but rather just
> a collection of data that some driver wants.
>
> A driver can just as easily look-up all the nodes directly that these
> phandles point to.

Agreed, that we can look up all the nodes directly that these phandles
refer to but I would still need a DT entry to bind to. While I could
bind to existing nodes like mscm cpucfg but that doesn't seem right.

The very first approach that we had taken was to integrate this functionality
in mach-vf610.c code under mach-imx
http://www.spinics.net/lists/devicetree/msg80654.html

and then it was recommended to migrate this to drivers/soc where we did use
phandles or direct look up via compatible strings

http://www.spinics.net/lists/arm-kernel/msg420847.html

and

http://lkml.iu.edu/hypermail/linux/kernel/1506.0/03787.html

There hasn't been a consensus since v1.

>
> And as long as we have inconsistent use of soc_device, I don't want to
> see any compatible strings related to it.
>

Regards,
Sanchayan.


\
 
 \ /
  Last update: 2016-05-24 07:01    [W:0.171 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site