lkml.org 
[lkml]   [2016]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/9] powerpc/powernv: Make power7_powersave_common more generic
Date
power7_powersave_common does common steps needed before entering idle
state and eventually changes MSR to MSR_IDLE and does rfid to
power7_enter_nap_mode.

Move the updation of HSTATE_HWTHREAD_STATE to power7_powersave_common
from power7_enter_nap_mode and make it more generic by passing the rfid
address as a function parameter.

Also make function name more generic.

Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
---
Changes in v3:
==============
- Moved HSTATE_HWTHREAD_STATE updation to power_powersave_common

arch/powerpc/kernel/idle_power_common.S | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/kernel/idle_power_common.S b/arch/powerpc/kernel/idle_power_common.S
index 973c9a1..d100577 100644
--- a/arch/powerpc/kernel/idle_power_common.S
+++ b/arch/powerpc/kernel/idle_power_common.S
@@ -74,8 +74,10 @@ core_idle_lock_held:
* To check IRQ_HAPPENED in r4
* 0 - don't check
* 1 - check
+ *
+ * Address to 'rfid' to in r5
*/
-_GLOBAL(power7_powersave_common)
+_GLOBAL(pnv_powersave_common)
/* Use r3 to pass state nap/sleep/winkle */
/* NAP is a state loss, we create a regs frame on the
* stack, fill it up with the state we care about and
@@ -126,28 +128,27 @@ _GLOBAL(power7_powersave_common)
std r9,_MSR(r1)
std r1,PACAR1(r13)

+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ /* Tell KVM we're napping */
+ li r4,KVM_HWTHREAD_IN_NAP
+ stb r4,HSTATE_HWTHREAD_STATE(r13)
+#endif
/*
* Go to real mode to do the nap, as required by the architecture.
* Also, we need to be in real mode before setting hwthread_state,
* because as soon as we do that, another thread can switch
* the MMU context to the guest.
*/
- LOAD_REG_IMMEDIATE(r5, MSR_IDLE)
+ LOAD_REG_IMMEDIATE(r7, MSR_IDLE)
li r6, MSR_RI
andc r6, r9, r6
- LOAD_REG_ADDR(r7, power7_enter_nap_mode)
mtmsrd r6, 1 /* clear RI before setting SRR0/1 */
- mtspr SPRN_SRR0, r7
- mtspr SPRN_SRR1, r5
+ mtspr SPRN_SRR0, r5
+ mtspr SPRN_SRR1, r7
rfid

.globl power7_enter_nap_mode
power7_enter_nap_mode:
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
- /* Tell KVM we're napping */
- li r4,KVM_HWTHREAD_IN_NAP
- stb r4,HSTATE_HWTHREAD_STATE(r13)
-#endif
stb r3,PACA_THREAD_IDLE_STATE(r13)
cmpwi cr3,r3,PNV_THREAD_SLEEP
bge cr3,2f
@@ -242,19 +243,22 @@ _GLOBAL(power7_idle)
_GLOBAL(power7_nap)
mr r4,r3
li r3,PNV_THREAD_NAP
- b power7_powersave_common
+ LOAD_REG_ADDR(r5, power7_enter_nap_mode)
+ b pnv_powersave_common
/* No return */

_GLOBAL(power7_sleep)
li r3,PNV_THREAD_SLEEP
li r4,1
- b power7_powersave_common
+ LOAD_REG_ADDR(r5, power7_enter_nap_mode)
+ b pnv_powersave_common
/* No return */

_GLOBAL(power7_winkle)
li r3,3
li r4,1
- b power7_powersave_common
+ LOAD_REG_ADDR(r5, power7_enter_nap_mode)
+ b pnv_powersave_common
/* No return */

#define CHECK_HMI_INTERRUPT \
--
2.4.11
\
 
 \ /
  Last update: 2016-05-23 17:41    [W:0.098 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site