lkml.org 
[lkml]   [2016]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/1] rtc: ds1685: correct check of day of month
Hi,

On 18/05/2016 at 21:09:29 +0200, Heinrich Schuchardt wrote :
> Operator ! has a higher priority than &&.
> (!(mday >= 1) && (mday <= 31)) is false for mday == 32.
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
> drivers/rtc/rtc-ds1685.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c
> index b3ce3c6..b4fae3c 100644
> --- a/drivers/rtc/rtc-ds1685.c
> +++ b/drivers/rtc/rtc-ds1685.c
> @@ -389,7 +389,7 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> ds1685_rtc_end_data_access(rtc);
>
> /* Check month date. */
> - if (!(mday >= 1) && (mday <= 31))
> + if ((mday < 1) || (mday > 31))
> return -EDOM;
>

This is a good catch but I think this also breaks the bcd_mode == 1
case because the test happens after the bin2bcd conversion. Can you
check/fix?

> /*
> @@ -461,7 +461,7 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> RTC_MDAY_BCD_MASK);
>
> /* Check the month date for validity. */
> - if (!(mday >= 1) && (mday <= 31))
> + if ((mday < 1) || (mday > 31))
> return -EDOM;
>
> /*

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-05-21 01:01    [W:2.267 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site