lkml.org 
[lkml]   [2016]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: dra7xx: program outbound atu with correct address
On Mon, May 02, 2016 at 04:54:40PM +0200, Niklas Cassel wrote:
> From: Niklas Cassel <niklas.cassel@axis.com>
>
> commit 1488aefa37a4 ("PCI: designware: Move Root Complex
> setup code to dw_pcie_setup_rc()") broke dra7xx
> by moving code from dw_pcie_host_init to dw_pcie_setup_rc.
>
> Fix this by doing the cpu to bus calculation before calling
> dw_pcie_setup_rc.
>
> Fixes: 1488aefa37a4 ("PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc()")
> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
> ---
> drivers/pci/host/pci-dra7xx.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
> index 2ca3a1f..f441130 100644
> --- a/drivers/pci/host/pci-dra7xx.c
> +++ b/drivers/pci/host/pci-dra7xx.c
> @@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
>
> static void dra7xx_pcie_host_init(struct pcie_port *pp)
> {
> - dw_pcie_setup_rc(pp);
> -
> pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
> pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
> pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
> pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
>
> + dw_pcie_setup_rc(pp);

This looks correct to me. Prior to 1488aefa37a4, we had this path,
which applied the dra7xx mem_base adjustment before programming the
outbound ATU:

dra7xx_add_pcie_port
dw_pcie_host_init
pp->mem_base = pp->mem->start # <-- set pp->mem_base
ops->host_init
dra7xx_pcie_host_init # .host_init
dw_pcie_setup_rc
pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- update pp->mem_base
dw_pcie_prog_outbound_atu(pp->mem_base) # <-- use pp->mem_base

After 1488aefa37a4, we have this:

dra7xx_add_pcie_port
dw_pcie_host_init
pp->mem_base = pp->mem->start # <-- set pp->mem_base
ops->host_init
dra7xx_pcie_host_init # .host_init
dw_pcie_setup_rc
dw_pcie_prog_outbound_atu(pp->mem_base) # <-- use pp->mem_base
pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- update pp->mem_base

So the dra7xx update is applied after we've already used it.

If you agree, Kishon, I'll fold Niklas's fix into Jisheng's patch so
there's no bisection hole for dra7xx.

> dra7xx_pcie_establish_link(pp);
> if (IS_ENABLED(CONFIG_PCI_MSI))
> dw_pcie_msi_init(pp);
> --
> 2.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

\
 
 \ /
  Last update: 2016-05-02 23:21    [W:0.058 / U:23.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site