lkml.org 
[lkml]   [2016]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/1 RFC] net/phy: Add Lantiq PHY driver
Date
Hi John,

On Thursday 19 May 2016 06:50:56, John Crispin wrote:
> On 18/05/2016 18:24, Florian Fainelli wrote:
> > CC'ing Andrew, John,
>
> also CC'ing Matthias and Hauke. we have had a driver in OpenWrt/LEDE for
> several years that seems a little more complete than this one.
>
> https://git.lede-project.org/?p=source.git;a=blob;f=target/linux/lantiq/patc
> hes-4.4/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch;h=93bb4275ec1d261f3
> 98afb8fdc879c1dd973f997;hb=HEAD

Thanks for the link, I wasn't aware of that patch. I like it in general, but
there are some things I'd like to get addressed first:
* vr9_gphy_of_reg_init() writes uncoditionally to led3h and led3l even on
PEf7071 which does not have this register at all
* Why is PHY_HAS_INTERRUPT commented out everywhere?
* ltq_phy_init and ltq_phy_exit can be simplified using phy_drivers_register
and phy_drivers_unregister
* A mdio_device_id table is missing

Best regards,
Alexander

\
 
 \ /
  Last update: 2016-05-19 09:21    [W:0.076 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site