lkml.org 
[lkml]   [2016]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] Revert "clk: rockchip: reset init state before mmc card initialization"
From
Date
On 2016-5-13 2:03, Douglas Anderson wrote:
> This reverts commit 7a03fe6f48f3 ("clk: rockchip: reset init state
> before mmc card initialization").
>
> Though not totally obvious from the commit message nor from the source
> code, that commit appears to be trying to reset the "_drv" MMC clocks to
> 90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are
> not touched).
>
> The major problem here is that it doesn't properly reset things. The
> phase is a two bit field and the commit only touches one of the two
> bits. Thus the commit had the following affect:
> - phase 0 => phase 90
> - phase 90 => phase 90
> - phase 180 => phase 270
> - phase 270 => phase 270
>
> Things get even weirder if you happen to have a bootloader that was
> actually using delay elements (should be no reason to, but you never
> know), since those are additional bits that weren't touched by the
> original patch.
>
> This is unlikely to be what we actually want. Checking on rk3288-veyron
> devices, I can see that the bootloader leaves these clocks as:
> - emmc: phase 180
> - sdmmc: phase 90
> - sdio0: phase 90
>
> Thus on rk3288-veyron devices the commit we're reverting had the effect
> of changing the eMMC clock to phase 270. This probably explains the
> scattered reports I've heard of eMMC devices not working on some veyron
> devices when using the upstream kernel.
>
> The original commit was presumably made because previously the kernel
> didn't touch the "_drv" phase at all and relied on whatever value was
> there when the kernel started. If someone was using a bootloader that
> touched the "_drv" phase then, indeed, we should have code in the kernel
> to fix that. ...and also, to get ideal timings, we should also have the
> kernel change the phase depending on the speed mode. In fact, that's
> the subject of a recent patch I posted at
> <https://patchwork.kernel.org/patch/9075141/>.
>
> Ideally, we should take both the patch posted to dw_mmc and this
> revert. Since those will likely go through different trees, here I
> describe behavior with the combos:
>
> 1. Just this revert: likely will fix rk3288-veyron eMMC on some devices
> + other cases; might break someone with a strange bootloader that
> sets the phase to 0 or one that uses delay elements (pretty
> unpredicable what would happen in that case).
> 2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will
> totally override the broken patch and fix everything.
> 3. Both patches: fixes everyone. Once dw_mmc is initting properly then
> any defaults from the clock code doesn't mattery.
>
> Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Thanks for this fix.

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> ---
> drivers/clk/rockchip/clk-mmc-phase.c | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
> index bc856f21f6b2..5b18265c2306 100644
> --- a/drivers/clk/rockchip/clk-mmc-phase.c
> +++ b/drivers/clk/rockchip/clk-mmc-phase.c
> @@ -41,8 +41,6 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw,
> #define ROCKCHIP_MMC_DEGREE_MASK 0x3
> #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
> #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
> -#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1
> -#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1
>
> #define PSECS_PER_SEC 1000000000000LL
>
> @@ -162,15 +160,6 @@ struct clk *rockchip_clk_register_mmc(const char *name,
> mmc_clock->reg = reg;
> mmc_clock->shift = shift;
>
> - /*
> - * Assert init_state to soft reset the CLKGEN
> - * for mmc tuning phase and degree
> - */
> - if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT)
> - writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET,
> - ROCKCHIP_MMC_INIT_STATE_RESET,
> - mmc_clock->shift), mmc_clock->reg);
> -
> clk = clk_register(NULL, &mmc_clock->hw);
> if (IS_ERR(clk))
> kfree(mmc_clock);
>

\
 
 \ /
  Last update: 2016-05-18 09:41    [W:0.100 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site