lkml.org 
[lkml]   [2016]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/9] powerpc/kvm: make hypervisor state restore a function
Hi Gautham,

On 05/18/2016 11:55 AM, Gautham R Shenoy wrote:
> Hi Shreyas,
>
> On Tue, May 03, 2016 at 01:54:31PM +0530, Shreyas B. Prabhu wrote:
>> In the current code, when the thread wakes up in reset vector, some
>> of the state restore code and check for whether a thread needs to
>> branch to kvm is duplicated. Reorder the code such that this
>> duplication is avoided.
>>
>> At a higher level this is what the change looks like-
>
> I have manually verified that the code flow in the new patch is has
> the same effect as whatever we were doing earlier. There a couple of
> comments inline.
>
Thanks for the review!

>> diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
>> index 7716ceb..7ebfbb0 100644
>> --- a/arch/powerpc/kernel/exceptions-64s.S
>> +++ b/arch/powerpc/kernel/exceptions-64s.S
>> @@ -107,25 +107,8 @@ BEGIN_FTR_SECTION
>> beq 9f
>>
>> cmpwi cr3,r13,2
>> + bl power7_restore_hyp_resource
>>
>> - /*
>> - * Check if last bit of HSPGR0 is set. This indicates whether we are
>> - * waking up from winkle.
>> - */
>> - GET_PACA(r13)
>> - clrldi r5,r13,63
>> - clrrdi r13,r13,1
>> - cmpwi cr4,r5,1
>> - mtspr SPRN_HSPRG0,r13
>> -
>> - lbz r0,PACA_THREAD_IDLE_STATE(r13)
>> - cmpwi cr2,r0,PNV_THREAD_NAP
>> - bgt cr2,8f /* Either sleep or Winkle */
>> -
>> - /* Waking up from nap should not cause hypervisor state loss */
>> - bgt cr3,.
>> -
>> - /* Waking up from nap */
>> li r0,PNV_THREAD_RUNNING
>> stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */
>>
>> @@ -143,13 +126,9 @@ BEGIN_FTR_SECTION
>>
>> /* Return SRR1 from power7_nap() */
>> mfspr r3,SPRN_SRR1
>> - beq cr3,2f
>> - b power7_wakeup_noloss
>> -2: b power7_wakeup_loss
>> -
>> - /* Fast Sleep wakeup on PowerNV */
>> -8: GET_PACA(r13)
>
> In the old code, we do a GET_PACA(r13) before invoking the
> power7_wakeup_tb_loss. In the new code we don't. Can you explain
> this omission ?

GET_PACA(13) is the called in the beginning of
power7_restore_hyp_resource. So r13 contains pointer to PACA when
power7_wakeup_tb_loss invoked later in the same function.
>
>
> [..snip..]
>
>> @@ -420,33 +451,9 @@ common_exit:
>>
>> hypervisor_state_restored:
>>
>> - li r5,PNV_THREAD_RUNNING
>> - stb r5,PACA_THREAD_IDLE_STATE(r13)
>> -
>> mtspr SPRN_SRR1,r16
>> -#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
>> - li r0,KVM_HWTHREAD_IN_KERNEL
>> - stb r0,HSTATE_HWTHREAD_STATE(r13)
>> - /* Order setting hwthread_state vs. testing hwthread_req */
>> - sync
>> - lbz r0,HSTATE_HWTHREAD_REQ(r13)
>> - cmpwi r0,0
>> - beq 6f
>> - b kvm_start_guest
>> -6:
>> -#endif
>> -
>> - REST_NVGPRS(r1)
>> - REST_GPR(2, r1)
>> - ld r3,_CCR(r1)
>> - ld r4,_MSR(r1)
>> - ld r5,_NIP(r1)
>> - addi r1,r1,INT_FRAME_SIZE
>> - mtcr r3
>> - mfspr r3,SPRN_SRR1 /* Return SRR1 */
>> - mtspr SPRN_SRR1,r4
>> - mtspr SPRN_SRR0,r5
>> - rfid
>> + mtlr r17
>> + blr
>
>
> Perhaps you could add a comment against this blr to indicate that we
> go back to the reset vector right after the call to
> power7_restore_hyp_resource.

Ok. I'll do that.
>
>>
>> fastsleep_workaround_at_exit:
>> li r3,1
>> --
>> 2.4.11
>>

\
 
 \ /
  Last update: 2016-05-18 09:21    [W:1.018 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site