lkml.org 
[lkml]   [2016]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] ARM: dts: omap3-gta04: Define and use bma180 irq pin
Date
From: "H. Nikolaus Schaller" <hns@goldelico.com>

Add pinmux and usage of bma180 irq pin.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index cef8b23..e0520cf 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -250,6 +250,12 @@
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
>;
};
+
+ bma180_pins: pinmux_bma180_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+ >;
+ };
};

&omap3_pmx_core2 {
@@ -320,6 +326,8 @@
bma180@41 {
compatible = "bosch,bma180";
reg = <0x41>;
+ pinctrl-names = "default";
+ pintcrl-0 = <&bma180_pins>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
};
--
2.5.0
\
 
 \ /
  Last update: 2016-05-17 22:01    [W:0.057 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site