lkml.org 
[lkml]   [2016]   [May]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/3] drm: Add helper for simple display pipeline
From
Date


Den 17.05.2016 14:12, skrev Ville Syrjälä:
> On Tue, May 17, 2016 at 02:00:45PM +0200, Noralf Trønnes wrote:
>> Den 17.05.2016 09:59, skrev Daniel Vetter:
>>> On Tue, May 17, 2016 at 10:46:51AM +0300, Ville Syrjälä wrote:
>>>> On Tue, May 17, 2016 at 09:05:01AM +0200, Daniel Vetter wrote:
>>>>> On Thu, May 12, 2016 at 09:36:14PM +0300, Ville Syrjälä wrote:
>>>>>> On Thu, May 12, 2016 at 08:25:23PM +0200, Noralf Trønnes wrote:
>>>>>>> Provides helper functions for drivers that have a simple display
>>>>>>> pipeline. Plane, crtc and encoder are collapsed into one entity.
>>>>>>>
>>>>>>> Cc: jsarha@ti.com
>>>>>>> Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
>>>>>>> ---
>>>>>>>
>>>>>>> Changes since v3:
>>>>>>> - (struct drm_simple_display_pipe *)->funcs should be const
>>>>>>>
>>>>>>> Changes since v2:
>>>>>>> - Drop Kconfig knob DRM_KMS_HELPER
>>>>>>> - Expand documentation
>>>>>>>
>>>>>>> Changes since v1:
>>>>>>> - Add DOC header and add to gpu.tmpl
>>>>>>> - Fix docs: @funcs is optional, "negative error code",
>>>>>>> "This hook is optional."
>>>>>>> - Add checks to drm_simple_kms_plane_atomic_check()
>>>>>>>
>>>>>>> Documentation/DocBook/gpu.tmpl | 6 +
>>>>>>> drivers/gpu/drm/Makefile | 2 +-
>>>>>>> drivers/gpu/drm/drm_simple_kms_helper.c | 208 ++++++++++++++++++++++++++++++++
>>>>>>> include/drm/drm_simple_kms_helper.h | 94 +++++++++++++++
>>>>>>> 4 files changed, 309 insertions(+), 1 deletion(-)
>>>>>>> create mode 100644 drivers/gpu/drm/drm_simple_kms_helper.c
>>>>>>> create mode 100644 include/drm/drm_simple_kms_helper.h
>>>>>>>
>>>>>>> diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
>>>>>>> index 4a0c599..cf3f5a8 100644
>>>>>>> --- a/Documentation/DocBook/gpu.tmpl
>>>>>>> +++ b/Documentation/DocBook/gpu.tmpl
>>>>>>> @@ -1693,6 +1693,12 @@ void intel_crt_init(struct drm_device *dev)
>>>>>>> !Edrivers/gpu/drm/drm_panel.c
>>>>>>> !Pdrivers/gpu/drm/drm_panel.c drm panel
>>>>>>> </sect2>
>>>>>>> + <sect2>
>>>>>>> + <title>Simple KMS Helper Reference</title>
>>>>>>> +!Iinclude/drm/drm_simple_kms_helper.h
>>>>>>> +!Edrivers/gpu/drm/drm_simple_kms_helper.c
>>>>>>> +!Pdrivers/gpu/drm/drm_simple_kms_helper.c overview
>>>>>>> + </sect2>
>>>>>>> </sect1>
>>>>>>>
>>>>>>> <!-- Internals: kms properties -->
>>>>>>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>>>>>>> index 2bd3e5a..31b85df5 100644
>>>>>>> --- a/drivers/gpu/drm/Makefile
>>>>>>> +++ b/drivers/gpu/drm/Makefile
>>>>>>> @@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
>>>>>>>
>>>>>>> drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
>>>>>>> drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
>>>>>>> - drm_kms_helper_common.o
>>>>>>> + drm_kms_helper_common.o drm_simple_kms_helper.o
>>>>>>>
>>>>>>> drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
>>>>>>> drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
>>>>>>> diff --git a/drivers/gpu/drm/drm_simple_kms_helper.c b/drivers/gpu/drm/drm_simple_kms_helper.c
>>>>>>> new file mode 100644
>>>>>>> index 0000000..d45417a
>>>>>>> --- /dev/null
>>>>>>> +++ b/drivers/gpu/drm/drm_simple_kms_helper.c
>>>>>>> @@ -0,0 +1,208 @@
>>>>>>> +/*
>>>>>>> + * Copyright (C) 2016 Noralf Trønnes
>>>>>>> + *
>>>>>>> + * This program is free software; you can redistribute it and/or modify
>>>>>>> + * it under the terms of the GNU General Public License as published by
>>>>>>> + * the Free Software Foundation; either version 2 of the License, or
>>>>>>> + * (at your option) any later version.
>>>>>>> + */
>>>>>>> +
>>>>>>> +#include <drm/drmP.h>
>>>>>>> +#include <drm/drm_atomic.h>
>>>>>>> +#include <drm/drm_atomic_helper.h>
>>>>>>> +#include <drm/drm_crtc_helper.h>
>>>>>>> +#include <drm/drm_plane_helper.h>
>>>>>>> +#include <drm/drm_simple_kms_helper.h>
>>>>>>> +#include <linux/slab.h>
>>>>>>> +
>>>>>>> +/**
>>>>>>> + * DOC: overview
>>>>>>> + *
>>>>>>> + * This helper library provides helpers for drivers for simple display
>>>>>>> + * hardware.
>>>>>>> + *
>>>>>>> + * drm_simple_display_pipe_init() initializes a simple display pipeline
>>>>>>> + * which has only one full-screen scanout buffer feeding one output. The
>>>>>>> + * pipeline is represented by struct &drm_simple_display_pipe and binds
>>>>>>> + * together &drm_plane, &drm_crtc and &drm_encoder structures into one fixed
>>>>>>> + * entity. Some flexibility for code reuse is provided through a separately
>>>>>>> + * allocated &drm_connector object and supporting optional &drm_bridge
>>>>>>> + * encoder drivers.
>>>>>>> + */
>>>>>>> +
>>>>>>> +static const struct drm_encoder_funcs drm_simple_kms_encoder_funcs = {
>>>>>>> + .destroy = drm_encoder_cleanup,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static void drm_simple_kms_crtc_enable(struct drm_crtc *crtc)
>>>>>>> +{
>>>>>>> + struct drm_simple_display_pipe *pipe;
>>>>>>> +
>>>>>>> + pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
>>>>>>> + if (!pipe->funcs || !pipe->funcs->enable)
>>>>>>> + return;
>>>>>>> +
>>>>>>> + pipe->funcs->enable(pipe, crtc->state);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static void drm_simple_kms_crtc_disable(struct drm_crtc *crtc)
>>>>>>> +{
>>>>>>> + struct drm_simple_display_pipe *pipe;
>>>>>>> +
>>>>>>> + pipe = container_of(crtc, struct drm_simple_display_pipe, crtc);
>>>>>>> + if (!pipe->funcs || !pipe->funcs->disable)
>>>>>>> + return;
>>>>>>> +
>>>>>>> + pipe->funcs->disable(pipe);
>>>>>>> +}
>>>>>>> +
>>>>>>> +static const struct drm_crtc_helper_funcs drm_simple_kms_crtc_helper_funcs = {
>>>>>>> + .disable = drm_simple_kms_crtc_disable,
>>>>>>> + .enable = drm_simple_kms_crtc_enable,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static const struct drm_crtc_funcs drm_simple_kms_crtc_funcs = {
>>>>>>> + .reset = drm_atomic_helper_crtc_reset,
>>>>>>> + .destroy = drm_crtc_cleanup,
>>>>>>> + .set_config = drm_atomic_helper_set_config,
>>>>>>> + .page_flip = drm_atomic_helper_page_flip,
>>>>>>> + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
>>>>>>> + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
>>>>>>> +};
>>>>>>> +
>>>>>>> +static int drm_simple_kms_plane_atomic_check(struct drm_plane *plane,
>>>>>>> + struct drm_plane_state *plane_state)
>>>>>>> +{
>>>>>>> + struct drm_rect src = {
>>>>>>> + .x1 = plane_state->src_x,
>>>>>>> + .y1 = plane_state->src_y,
>>>>>>> + .x2 = plane_state->src_x + plane_state->src_w,
>>>>>>> + .y2 = plane_state->src_y + plane_state->src_h,
>>>>>>> + };
>>>>>>> + struct drm_rect dest = {
>>>>>>> + .x1 = plane_state->crtc_x,
>>>>>>> + .y1 = plane_state->crtc_y,
>>>>>>> + .x2 = plane_state->crtc_x + plane_state->crtc_w,
>>>>>>> + .y2 = plane_state->crtc_y + plane_state->crtc_h,
>>>>>>> + };
>>>>>>> + struct drm_rect clip = { 0 };
>>>>>>> + struct drm_simple_display_pipe *pipe;
>>>>>>> + struct drm_crtc_state *crtc_state;
>>>>>>> + bool visible;
>>>>>>> + int ret;
>>>>>>> +
>>>>>>> + pipe = container_of(plane, struct drm_simple_display_pipe, plane);
>>>>>>> + crtc_state = drm_atomic_get_existing_crtc_state(plane_state->state,
>>>>>>> + &pipe->crtc);
>>>>>>> + if (crtc_state->enable != !!plane_state->crtc)
>>>>>>> + return -EINVAL; /* plane must match crtc enable state */
>>>>>>> +
>>>>>>> + if (!crtc_state->enable)
>>>>>>> + return 0; /* nothing to check when disabling or disabled */
>>>>>>> +
>>>>>>> + clip.x2 = crtc_state->adjusted_mode.hdisplay;
>>>>>>> + clip.y2 = crtc_state->adjusted_mode.vdisplay;
>>>>>>> + ret = drm_plane_helper_check_update(plane, &pipe->crtc,
>>>>>>> + plane_state->fb,
>>>>>>> + &src, &dest, &clip,
>>>>>>> + DRM_PLANE_HELPER_NO_SCALING,
>>>>>>> + DRM_PLANE_HELPER_NO_SCALING,
>>>>>>> + false, true, &visible);
>>>>>>> + if (ret)
>>>>>>> + return ret;
>>>>>>> +
>>>>>>> + if (!visible)
>>>>>>> + return -EINVAL;
>>>>>>> +
>>>>>>> + if (!pipe->funcs || !pipe->funcs->check)
>>>>>>> + return 0;
>>>>>>> +
>>>>>>> + return pipe->funcs->check(pipe, plane_state, crtc_state);
>>>>>>> +}
>>>>>> What's anyone supposed to do with this when the clipped coordinates
>>>>>> aren't even passed/stored anywhere?
>>>>> It disallows positioning and scaling, so shouldn't ever need to have the
>>>>> clipped area?
>>>> You can still configure a larger area that gets clipped to the
>>>> fullscreen dimensions.
>>> Oh right. Noralf, sounds like we need to feed back the clipped rectangle.
>>> Probably best if we add clipped plane coordinates to drm_plane_state.
>> Both src and crtc or only src?
>>
>> if (!visible)
>> return -EINVAL;
>> +
>> + plane_state->src_x = src.x1;
>> + plane_state->src_y = src.y1;
>> + plane_state->src_w = drm_rect_width(&src);
>> + plane_state->src_h = drm_rect_height(&src);
>> +
>> + plane_state->crtc_x = dest.x1;
>> + plane_state->crtc_y = dest.y1;
>> + plane_state->crtc_w = drm_rect_width(&dest);
>> + plane_state->crtc_h = drm_rect_height(&dest);
> You aren't allowed clobber the user provided coordinates like this.
> What you need to do is store the clipped coordinates in the plane
> state in addition to the user coordinates.

How do I do that?

\
 
 \ /
  Last update: 2016-05-17 14:41    [W:0.422 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site