lkml.org 
[lkml]   [2016]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [v5,1/7] QE: Add IC, SI and SIRAM document to device tree bindings.
On Wed, Mar 09, 2016 at 09:21:28AM +0800, Zhao Qiang wrote:
> Add IC, SI and SIRAM document of QE to
> Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> changes for v2
> - Add interrupt-controller in Required properties
> - delete address-cells and size-cells for qe-si and qe-siram
> Changes for v3
> - Add SoC specific caompatible strings to qe-si and qe-siram
> Changes for v4
> - NA
> Changes for v5
> - NA
>
> .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 50 ++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> index 4f89302..7ab21cb 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
> @@ -69,6 +69,56 @@ Example:
> };
> };
>
> +* Interrupt Controller (IC)
> +
> +Required properties:
> +- compatible : should be "fsl,qe-ic".
> +- reg : Address range of IC register set.
> +- interrupts : interrupts generated by the device.
> +- interrupt-controller : this device is a interrupt controller.
> +
> +Example:
> +
> + qeic: interrupt-controller@80 {
> + interrupt-controller;
> + compatible = "fsl,qe-ic";
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + reg = <0x80 0x80>;
> + interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
> + };

Why is the information about which interrupt is "high" and which is
"low" in a comment in the example, rather than in the definition of the
interrupts property?

> +* Serial Interface Block (SI)
> +
> +The SI manages the routing of eight TDM lines to the QE block serial drivers
> +, the MCC and the UCCs, for receive and transmit.
> +
> +Required properties:
> +- compatible : should be "fsl,t1040-qe-si".
> +- reg : Address range of SI register set.

Is t1040 the only chip that has or will ever have this?

-Scott

\
 
 \ /
  Last update: 2016-05-17 01:41    [W:0.128 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site