lkml.org 
[lkml]   [2016]   [May]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] crypto/sha1-mb: make sha1_x8_avx2() conform to C function ABI
On Mon, May 16, 2016 at 02:39:06PM -0700, Megha Dey wrote:
> On Mon, 2016-05-16 at 15:16 -0500, Josh Poimboeuf wrote:
> > On Mon, May 16, 2016 at 11:31:12AM -0700, Megha Dey wrote:
> > > On Mon, 2016-05-16 at 09:44 -0500, Josh Poimboeuf wrote:
> > > > On Fri, May 13, 2016 at 10:32:26AM -0700, Megha Dey wrote:
> > > > > On Fri, 2016-05-13 at 07:51 +0200, Ingo Molnar wrote:
> > > > > > * Herbert Xu <herbert@gondor.apana.org.au> wrote:
> > > > > >
> > > > > > > On Thu, May 12, 2016 at 04:31:06PM -0700, Megha Dey wrote:
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > When booting latest kernel with the CONFIG_CRYPTO_SHA1_MB enabled, I
> > > > > > > > observe a panic.
> > > > > > > >
> > > > > > > > After having a quick look, on reverting the following patches, I am able
> > > > > > > > to complete the booting process.
> > > > > > > > aec4d0e301f17bb143341c82cc44685b8af0b945
> > > > > > > > 8691ccd764f9ecc69a6812dfe76214c86ac9ba06
> > > > > > > > 68874ac3304ade7ed5ebb12af00d6b9bbbca0a16
> > > > > > > >
> > > > > > > > Of the 3 patches, aec4d0e301f17bb143341c82cc44685b8af0b945 seems wrong.
> > > > > > > > The r10 to r15 registers are used in sha1_x8_avx2.S, which is called
> > > > > > > > from sha1_mb_mgr_flush_avx2.S.
> > > > > > > >
> > > > > > > > I do not think the functionality of the SHA1-MB crypto algorithm has
> > > > > > > > been tested after applying these changes. (I am not sure if any of the
> > > > > > > > other crypto algorithms have been affected by these changes).
> > > > > > >
> > > > > > > Josh, Ingo:
> > > > > > >
> > > > > > > Any ideas on this? Should we revert?
> > > > > >
> > > > > > Yeah, I think so - although another option would be to standardize sha1_x8_avx2()
> > > > > > - the problem is that it is a function that clobbers registers without
> > > > > > saving/restoring them, breaking the C function ABI. I realize it's written in
> > > > > > assembly, but unless there are strong performance reasons to deviate from the
> > > > > > regular calling convention it might make sense to fix that.
> > > > > >
> > > > > > Do any warnings get generated after the revert, if you enable
> > > > > > CONFIG_STACK_VALIDATION=y?
> > > > >
> > > > > After the revert and enabling CONFIG_STACK_VALIDATION:
> > > > > arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.o: warning: objtool:
> > > > > sha1_mb_mgr_flush_avx2()+0x20d: call without frame pointer save/setup
> > > > >
> > > > > arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.o: warning: objtool:
> > > > > sha1_mb_mgr_submit_avx2()+0x115: call without frame pointer save/setup
> > > >
> > > > Megha,
> > > >
> > > > Sorry for breaking it. I completely missed the fact that the function
> > > > calls sha1_x8_avx2() which clobbers registers.
> > > >
> > > > If the performance penalty isn't too bad, I'll submit a patch to
> > > > standardize sha1_x8_avx2() to follow the C ABI.
> > > >
> > > > Do you have any tips for testing this code? I've tried using the tcrypt
> > > > module, but no luck.
> > > >
> > > Josh,
> > > Build the kernel with the following configs:
> > > CONFIG_CRYPTO_SHA1_MB=y
> > > CONFIG_CRYPTO_TEST=m
> > > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=n
> > > There was a kernel panic while booting.
> > > So if after applying your new patch, we are able to get complete the
> > > boot, then we are good.
> > >
> > > Could you please send a copy of the patch, I could test it on my end
> > > too.
> >
> > Thanks. I was able to run the tests, though I didn't see a panic. Can
> > you test with this patch?
> >
> > ----
> >
> > From: Josh Poimboeuf <jpoimboe@redhat.com>
> > Subject: [PATCH] crypto/sha1-mb: make sha1_x8_avx2() conform to C function ABI
> >
> > Megha Day reported a kernel panic in crypto code. The problem is that
> > sha1_x8_avx2() clobbers registers r12-r15 without saving and restoring
> > them.
> >
> > Before commit aec4d0e301f1 ("x86/asm/crypto: Simplify stack usage in
> > sha-mb functions"), those registers were saved and restored by the
> > callers of the function. I removed them with that commit because I
> > didn't realize sha1_x8_avx2() clobbered them.
> >
> > Fix the potential undefined behavior associated with clobbering the
> > registers and make the behavior less surprising by changing the
> > registers to be callee saved/restored to conform with the C function
> > call ABI.
> >
> > Also, rdx (aka RSP_SAVE) doesn't need to be saved: I verified that none
> > of the callers rely on it being saved, and it's not a callee-saved
> > register in the C ABI.
> >
> > Fixes: aec4d0e301f1 ("x86/asm/crypto: Simplify stack usage in sha-mb functions")
> > Cc: stable@vger.kernel.org # 4.6
> > Reported-by: Megha Dey <megha.dey@linux.intel.com>
> > Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
> > ---
> > arch/x86/crypto/sha-mb/sha1_x8_avx2.S | 13 +++++++++++--
> > 1 file changed, 11 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/x86/crypto/sha-mb/sha1_x8_avx2.S b/arch/x86/crypto/sha-mb/sha1_x8_avx2.S
> > index 8e1b477..c9dae1c 100644
> > --- a/arch/x86/crypto/sha-mb/sha1_x8_avx2.S
> > +++ b/arch/x86/crypto/sha-mb/sha1_x8_avx2.S
> > @@ -296,7 +296,11 @@ W14 = TMP_
> > #
> > ENTRY(sha1_x8_avx2)
> >
> > - push RSP_SAVE
> > + # save callee-saved clobbered registers to comply with C function ABI
> > + push %r12
> > + push %r13
> > + push %r14
> > + push %r15
> >
> > #save rsp
> > mov %rsp, RSP_SAVE
> > @@ -446,7 +450,12 @@ lloop:
> > ## Postamble
> >
> > mov RSP_SAVE, %rsp
> > - pop RSP_SAVE
> > +
> > + # restore callee-saved clobbered registers
> > + pop %r15
> > + pop %r14
> > + pop %r13
> > + pop %r12
> >
> > ret
> > ENDPROC(sha1_x8_avx2)
>
> Hi Josh,
> I don't see the panic and am able to boot. However, I am not able to see
> the tests running. You said you were able to insert the tcrypt module
> and test this right?

I didn't insert tcrypt manually, but I set the config flags you
suggested, plus I added a few printks, and was at least able to verify
that this code ran during boot without any crypto test errors or other
warnings being reported.

--
Josh

\
 
 \ /
  Last update: 2016-05-17 00:01    [W:0.077 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site