lkml.org 
[lkml]   [2016]   [May]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 1/4] dt-bindings: bus: Add documentation for Tegra210 ACONNECT
On Tue, May 10, 2016 at 12:35:37PM +0100, Jon Hunter wrote:
> Add binding documentation for the Tegra ACONNECT bus that is part of the
> Audio Processing Engine (APE) on Tegra210. The ACONNECT bus is used to
> access devices within the APE subsystem. The APE is located in a
> separate power domain and so accesses made to the ACONNECT require the
> power domain to be enabled as well as some platform specific clocks.
>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
> .../bindings/bus/nvidia,tegra210-aconnect.txt | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
>
> diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
> new file mode 100644
> index 000000000000..81668f588eca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
> @@ -0,0 +1,45 @@
> +NVIDIA Tegra ACONNECT Bus
> +
> +The Tegra ACONNECT bus is an AXI switch which is used to connnect various
> +components inside the Audio Processing Engine (APE). All CPU accesses to
> +the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
> +
> +Required properties:
> +- compatible: Must be "nvidia,tegra210-aconnect".
> +- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
> + and APE interface clock (TEGRA210_CLK_APB2APE).
> +- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
> + 'clocks' entries.
> +- power-domains: Must contain a phandle that points to the audio powergate
> + (namely 'aud') for Tegra210.
> +- #address-cells: The number of cells used to represent physical base addresses
> + in the aconnect address space. Should be 2.
> +- #size-cells: The number of cells used to represent the size of an address
> + range in the aconnect address space. Should be 2.

You forgot to update these. With that,

Acked-by: Rob Herring <robh@kernel.org>

Rob

\
 
 \ /
  Last update: 2016-05-14 16:41    [W:0.171 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site