lkml.org 
[lkml]   [2016]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Question] Missing data after DMA read transfer - mm issue with transparent huge page?
On Thu, May 12, 2016 at 03:30:24PM +0200, Nicolas Morey-Chaisemartin wrote:
> Le 05/12/2016 à 11:36 AM, Jerome Glisse a écrit :
> > On Thu, May 12, 2016 at 08:07:59AM +0200, Nicolas Morey-Chaisemartin wrote:
> >>
> >> Le 05/11/2016 à 04:51 PM, Jerome Glisse a écrit :
> >>> On Wed, May 11, 2016 at 01:15:54PM +0200, Nicolas Morey Chaisemartin wrote:
> >>>> Le 05/10/2016 à 12:01 PM, Jerome Glisse a écrit :
> >>>>> On Tue, May 10, 2016 at 09:04:36AM +0200, Nicolas Morey Chaisemartin wrote:
> >>>>>> Le 05/03/2016 à 12:11 PM, Jerome Glisse a écrit :
> >>>>>>> On Mon, May 02, 2016 at 09:04:02PM -0700, Hugh Dickins wrote:
> >>>>>>>> On Fri, 29 Apr 2016, Nicolas Morey Chaisemartin wrote:
> >>>> [...]
> >>>>>> Hi,
> >>>>>>
> >>>>>> I backported the patch to 3.10 (had to copy paste pmd_protnone defitinition from 4.5) and it's working !
> >>>>>> I'll open a ticket in Redhat tracker to try and get this fixed in RHEL7.
> >>>>>>
> >>>>>> I have a dumb question though: how can we end up in numa/misplaced memory code on a single socket system?
> >>>>>>
> >>>>> This patch is not a fix, do you see bug message in kernel log ? Because if
> >>>>> you do that it means we have a bigger issue.
> >>>>>
> >>>>> You did not answer one of my previous question, do you set get_user_pages
> >>>>> with write = 1 as a paremeter ?
> >>>>>
> >>>>> Also it would be a lot easier if you were testing with lastest 4.6 or 4.5
> >>>>> not RHEL kernel as they are far appart and what might looks like same issue
> >>>>> on both might be totaly different bugs.
> >>>>>
> >>>>> If you only really care about RHEL kernel then open a bug with Red Hat and
> >>>>> you can add me in bug-cc <jglisse@redhat.com>
> >>>>>
> >>>>> Cheers,
> >>>>> Jérôme
> >>>> I finally managed to get a proper setup.
> >>>> I build a vanilla 4.5 kernel from git tree using the Centos7 config, my test fails as usual.
> >>>> I applied your patch, rebuild => still fails and no new messages in dmesg.
> >>>>
> >>>> Now that I don't have to go through the RPM repackaging, I can try out things much quicker if you have any ideas.
> >>>>
> >>> Still an issue if you boot with transparent_hugepage=never ?
> >>>
> >>> Also to simplify investigation force write to 1 all the time no matter what.
> >>>
> >>> Cheers,
> >>> Jérôme
> >> With transparent_hugepage=never I can't see the bug anymore.
> >>
> > Can you test https://patchwork.kernel.org/patch/9061351/ with 4.5
> > (does not apply to 3.10) and without transparent_hugepage=never
> >
> > Jérôme
>
> Fails with 4.5 + this patch and with 4.5 + this patch + yours
>

There must be some bug in your code, we have upstream user that works
fine with the above combination (see drivers/vfio/vfio_iommu_type1.c)
i suspect you might be releasing the page pin too early (put_page()).

If you really believe it is bug upstream we would need a dumb kernel
module that does gup like you do and that shows the issue. Right now
looking at code (assuming above patches applied) i can't see anything
that can go wrong with THP.

Cheers,
Jérôme

\
 
 \ /
  Last update: 2016-05-12 16:01    [W:0.069 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site