lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT
Date
Add the ability to reboot via a reset of the processor.  This is
achieved via a write of 0x39 to the CRU Reset Register. Unfortunately,
this only resets the core and not the other IP blocks. So if possible,
other methods should be used on the individual boards.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
arch/arm/boot/dts/bcm5301x.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ffc4a9b..d4e1672 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -246,6 +246,18 @@
"sata2";
};

+ cru: cru@1800c184 {
+ compatible = "syscon";
+ reg = <0x1800c184 0x4>;
+ };
+
+ reboot@1800c184 {
+ compatible ="syscon-reboot";
+ regmap = <&cru>;
+ offset = <0>;
+ mask = <0x39>;
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
--
1.9.1
\
 
 \ /
  Last update: 2016-05-12 01:41    [W:0.030 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site