lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] watchdog: ebc-c384_wdt: Simplify ebc_c384_wdt_start timeout computation
On Wed, May 11, 2016 at 09:05:51AM -0400, William Breathitt Gray wrote:
> The ebc_c384_wdt_set_timeout function already rounds up timeout values
> greater than 255 to a multiple of 60, so there is no need to round again
> in the ebc_c384_wdt_start function; a timeout value greater than 255 in
> ebc_c384_wdt_start will divide cleanly by 60.
>
... except if the timeout is set with the module parameter, which is now
rounded down, which would be a problem since it would time out earlier than
expected (a timeout of 299 seconds, set with the module parameter, would
time out after 240 seconds). So you would have to do some calculations
on the timeout value set with the module parameter to ensure that it is
set to a correct value.

Guenter

> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> ---
> drivers/watchdog/ebc-c384_wdt.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/watchdog/ebc-c384_wdt.c b/drivers/watchdog/ebc-c384_wdt.c
> index 77fda0b..948e687 100644
> --- a/drivers/watchdog/ebc-c384_wdt.c
> +++ b/drivers/watchdog/ebc-c384_wdt.c
> @@ -51,7 +51,7 @@ static int ebc_c384_wdt_start(struct watchdog_device *wdev)
>
> /* resolution is in minutes for timeouts greater than 255 seconds */
> if (t > 255)
> - t = DIV_ROUND_UP(t, 60);
> + t /= 60;
>
> outb(t, PET_ADDR);
>
> --
> 2.7.3
>

\
 
 \ /
  Last update: 2016-05-11 16:21    [W:0.260 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site