lkml.org 
[lkml]   [2016]   [May]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] cfg80211/nl80211: add wifi tx power mode switching support
From
On Fri, May 6, 2016 at 4:19 PM, Wei-Ning Huang <wnhuang@google.com> wrote:
> On Fri, May 6, 2016 at 12:07 AM, Dan Williams <dcbw@redhat.com> wrote:
>>
>> On Thu, 2016-05-05 at 14:44 +0800, Wei-Ning Huang wrote:
>> > Recent new hardware has the ability to switch between tablet mode and
>> > clamshell mode. To optimize WiFi performance, we want to be able to
>> > use
>> > different power table between modes. This patch adds a new netlink
>> > message type and cfg80211_ops function to allow userspace to trigger
>> > a
>> > power mode switch for a given wireless interface.
>> >
>> > Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org>
>> > ---
>> > include/net/cfg80211.h | 11 +++++++++++
>> > include/uapi/linux/nl80211.h | 21 +++++++++++++++++++++
>> > net/wireless/nl80211.c | 16 ++++++++++++++++
>> > net/wireless/rdev-ops.h | 22 ++++++++++++++++++++++
>> > net/wireless/trace.h | 20 ++++++++++++++++++++
>> > 5 files changed, 90 insertions(+)
>> >
>> > diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
>> > index 9e1b24c..aa77fa0 100644
>> > --- a/include/net/cfg80211.h
>> > +++ b/include/net/cfg80211.h
>> > @@ -2370,6 +2370,12 @@ struct cfg80211_qos_map {
>> > * @get_tx_power: store the current TX power into the dbm variable;
>> > * return 0 if successful
>> > *
>> > + * @set_tx_power_mode: set the transmit power mode. Some device have
>> > the ability
>> > + * to transform between different mode such as clamshell and
>> > tablet mode.
>> > + * set_tx_power_mode allows setting of different TX power
>> > mode at runtime.
>> > + * @get_tx_power_mode: store the current TX power mode into the mode
>> > variable;
>> > + * return 0 if successful
>> > + *
>> > * @set_wds_peer: set the WDS peer for a WDS interface
>> > *
>> > * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
>> > @@ -2631,6 +2637,11 @@ struct cfg80211_ops {
>> > int (*get_tx_power)(struct wiphy *wiphy, struct
>> > wireless_dev *wdev,
>> > int *dbm);
>> >
>> > + int (*set_tx_power_mode)(struct wiphy *wiphy,
>> > + enum nl80211_tx_power_mode
>> > mode);
>> > + int (*get_tx_power_mode)(struct wiphy *wiphy,
>> > + enum nl80211_tx_power_mode
>> > *mode);
>> > +
>> > int (*set_wds_peer)(struct wiphy *wiphy, struct
>> > net_device *dev,
>> > const u8 *addr);
>> >
>> > diff --git a/include/uapi/linux/nl80211.h
>> > b/include/uapi/linux/nl80211.h
>> > index 5a30a75..9b1888a 100644
>> > --- a/include/uapi/linux/nl80211.h
>> > +++ b/include/uapi/linux/nl80211.h
>> > @@ -1796,6 +1796,9 @@ enum nl80211_commands {
>> > * connecting to a PCP, and in %NL80211_CMD_START_AP to start
>> > * a PCP instead of AP. Relevant for DMG networks only.
>> > *
>> > + * @NL80211_ATTR_WIPHY_TX_POWER_MODE: Transmit power mode. See
>> > + * &enum nl80211_tx_power_mode for possible values.
>> > + *
>> > * @NUM_NL80211_ATTR: total number of nl80211_attrs available
>> > * @NL80211_ATTR_MAX: highest attribute number currently defined
>> > * @__NL80211_ATTR_AFTER_LAST: internal use
>> > @@ -2172,6 +2175,8 @@ enum nl80211_attrs {
>> >
>> > NL80211_ATTR_PBSS,
>> >
>> > + NL80211_ATTR_WIPHY_TX_POWER_MODE,
>> > +
>> > /* add attributes here, update the policy in nl80211.c */
>> >
>> > __NL80211_ATTR_AFTER_LAST,
>> > @@ -3703,6 +3708,22 @@ enum nl80211_tx_power_setting {
>> > };
>> >
>> > /**
>> > + * enum nl80211_tx_power_mode - TX power mode setting
>> > + * @NL80211_TX_POWER_LOW: general low TX power mode
>> > + * @NL80211_TX_POWER_MEDIUM: general medium TX power mode
>> > + * @NL80211_TX_POWER_HIGH: general high TX power mode
>> > + * @NL80211_TX_POWER_CLAMSHELL: clamshell mode TX power mode
>> > + * @NL80211_TX_POWER_TABLET: tablet mode TX power mode
>> > + */
>> > +enum nl80211_tx_power_mode {
>> > + NL80211_TX_POWER_LOW,
>> > + NL80211_TX_POWER_MEDIUM,
>> > + NL80211_TX_POWER_HIGH,
>> > + NL80211_TX_POWER_CLAMSHELL,
>> > + NL80211_TX_POWER_TABLET,
>>
>
>> "clamshell" and "tablet" probably mean many different things to many
>> different people with respect to whether or not they should do anything
>> with power saving or wifi. I feel like a more generic interface is
>> needed here.
> We could probably drop those two CLAMSHELL and TABLET constant or
> describing what they mean
> in more detail?
>
>>
>> Could this be already done by:
>> @NL80211_ATTR_WIPHY_TX_POWER_SETTING = NL80211_TX_POWER_LIMITED
>> @NL80211_ATTR_WIPHY_TX_POWER_LEVEL = <limit for clamshell/tablet mode>
>>
>> and then the device would be able to change its TX power as it saw fit
>> up to that limit set by your application which figures out whether it's
>> in clamshell or tablet mode?
>
> We usually want different power settings in different band/channel.
> For example, we can have three different power settings
> in 2.4Ghz, channels 36-64 & channels 100+ on 5Ghz. In this case, we
> can not simply set a fixed number to the power level.
> A power table is required to map channel/band to actual power limit.
> For most of the driver, changing power table requires loading
> a new set of calibration data from either devicetree or ACPI. Due to
> this, a new message type is required to allow the driver to
> switch between tables.
>
> Wei-Ning

Hi Dan,

Does this make sense to you? If so I'll send another patch to clarify
the term clamshell / tablet mode.
Thanks for reviewing.

Wei-Ning
>>
>>
>> Dan
>>
>> > +};
>> > +
>> > +/**
>> > * enum nl80211_packet_pattern_attr - packet pattern attribute
>> > * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
>> > * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
>> > diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
>> > index 056a730..61b474d 100644
>> > --- a/net/wireless/nl80211.c
>> > +++ b/net/wireless/nl80211.c
>> > @@ -402,6 +402,7 @@ static const struct nla_policy
>> > nl80211_policy[NUM_NL80211_ATTR] = {
>> > [NL80211_ATTR_SCHED_SCAN_DELAY] = { .type = NLA_U32 },
>> > [NL80211_ATTR_REG_INDOOR] = { .type = NLA_FLAG },
>> > [NL80211_ATTR_PBSS] = { .type = NLA_FLAG },
>> > + [NL80211_ATTR_WIPHY_TX_POWER_MODE] = { .type = NLA_U32 },
>> > };
>> >
>> > /* policy for the key attributes */
>> > @@ -2218,6 +2219,21 @@ static int nl80211_set_wiphy(struct sk_buff
>> > *skb, struct genl_info *info)
>> > return result;
>> > }
>> >
>> > + if (info->attrs[NL80211_ATTR_WIPHY_TX_POWER_MODE]) {
>> > + enum nl80211_tx_power_mode mode;
>> > + int idx = 0;
>> > +
>> > + if (!rdev->ops->set_tx_power_mode)
>> > + return -EOPNOTSUPP;
>> > +
>> > + idx = NL80211_ATTR_WIPHY_TX_POWER_MODE;
>> > + mode = nla_get_u32(info->attrs[idx]);
>> > +
>> > + result = rdev_set_tx_power_mode(rdev, mode);
>> > + if (result)
>> > + return result;
>> > + }
>> > +
>> > if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
>> > info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
>> > u32 tx_ant, rx_ant;
>> > diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
>> > index 8ae0c04..c3a1035 100644
>> > --- a/net/wireless/rdev-ops.h
>> > +++ b/net/wireless/rdev-ops.h
>> > @@ -552,6 +552,28 @@ static inline int rdev_get_tx_power(struct
>> > cfg80211_registered_device *rdev,
>> > return ret;
>> > }
>> >
>> > +static inline int
>> > +rdev_set_tx_power_mode(struct cfg80211_registered_device *rdev,
>> > + enum nl80211_tx_power_mode mode)
>> > +{
>> > + int ret;
>> > + trace_rdev_set_tx_power_mode(&rdev->wiphy, mode);
>> > + ret = rdev->ops->set_tx_power_mode(&rdev->wiphy, mode);
>> > + trace_rdev_return_int(&rdev->wiphy, ret);
>> > + return ret;
>> > +}
>> > +
>> > +static inline int
>> > +rdev_get_tx_power_mode(struct cfg80211_registered_device *rdev,
>> > + enum nl80211_tx_power_mode *mode)
>> > +{
>> > + int ret;
>> > + trace_rdev_get_tx_power_mode(&rdev->wiphy);
>> > + ret = rdev->ops->get_tx_power_mode(&rdev->wiphy, mode);
>> > + trace_rdev_return_int_int(&rdev->wiphy, ret, *mode);
>> > + return ret;
>> > +}
>> > +
>> > static inline int rdev_set_wds_peer(struct
>> > cfg80211_registered_device *rdev,
>> > struct net_device *dev, const u8
>> > *addr)
>> > {
>> > diff --git a/net/wireless/trace.h b/net/wireless/trace.h
>> > index 09b242b..132c8c2 100644
>> > --- a/net/wireless/trace.h
>> > +++ b/net/wireless/trace.h
>> > @@ -1420,6 +1420,26 @@ TRACE_EVENT(rdev_set_tx_power,
>> > WIPHY_PR_ARG, WDEV_PR_ARG,__entry->type, __entry-
>> > >mbm)
>> > );
>> >
>> > +DEFINE_EVENT(wiphy_only_evt, rdev_get_tx_power_mode,
>> > + TP_PROTO(struct wiphy *wiphy),
>> > + TP_ARGS(wiphy)
>> > +);
>> > +
>> > +TRACE_EVENT(rdev_set_tx_power_mode,
>> > + TP_PROTO(struct wiphy *wiphy, enum nl80211_tx_power_mode
>> > mode),
>> > + TP_ARGS(wiphy, mode),
>> > + TP_STRUCT__entry(
>> > + WIPHY_ENTRY
>> > + __field(enum nl80211_tx_power_mode, mode)
>> > + ),
>> > + TP_fast_assign(
>> > + WIPHY_ASSIGN;
>> > + __entry->mode = mode;
>> > + ),
>> > + TP_printk(WIPHY_PR_FMT ", mode: %d",
>> > + WIPHY_PR_ARG, __entry->mode)
>> > +);
>> > +
>> > TRACE_EVENT(rdev_return_int_int,
>> > TP_PROTO(struct wiphy *wiphy, int func_ret, int func_fill),
>> > TP_ARGS(wiphy, func_ret, func_fill),
>
>
>
>
> --
> Wei-Ning Huang, 黃偉寧 | Software Engineer, Google Inc., Taiwan |
> wnhuang@google.com | Cell: +886 910-380678



--
Wei-Ning Huang, 黃偉寧 | Software Engineer, Google Inc., Taiwan |
wnhuang@google.com | Cell: +886 910-380678

\
 
 \ /
  Last update: 2016-05-11 07:21    [W:0.066 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site