lkml.org 
[lkml]   [2016]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt: add Atmel Captouch bindings
Date
From: Daniel Hung-yu Wu <hywu@google.com>

Add binding for Atmel Capacitive Touch Button device.

Signed-off-by: Daniel Hung-yu Wu <hywu@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
---
.../devicetree/bindings/input/atmel,captouch.txt | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/atmel,captouch.txt

I haven't posted the corresponding device driver and dtsi changes yet but will shortly.

V2: split Documentation/devicetree/bindings from driver patch
rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
which controller implements the register set/controller.

V1: posted https://lkml.org/lkml/2016/5/3/613

diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
new file mode 100644
index 0000000..405d287
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.txt
@@ -0,0 +1,34 @@
+Device tree bindings for Atmel AtmegaXX capacitive touch sensor
+
+The node for this device must be a child of a I2C controller node, as the
+device communicates via I2C.
+
+Required properties:
+
+ compatible: Must be "atmel,captouch".
+ reg: The I2C slave address of the device.
+ interrupts: Property describing the interrupt line the device
+ is connected to. The device only has one interrupt
+ source.
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 8 entries.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+Example:
+
+ atmel_captouch@51 {
+ compatible = "atmel,captouch";
+ reg = <0x51>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+ linux,keycodes = <BTN_0>, <BTN_1>,
+ <BTN_2>, <BTN_3>,
+ <BTN_4>, <BTN_5>,
+ <BTN_6>, <BTN_7>;
+ autorepeat;
+ };
--
2.1.2
\
 
 \ /
  Last update: 2016-05-11 04:41    [W:0.052 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site