lkml.org 
[lkml]   [2016]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Odroid XU4 deadlock
hi Javier,

On 8 April 2016 at 20:25, Javier Martinez Canillas
<javier@osg.samsung.com> wrote:
> Hello Anand,
>
> On 04/08/2016 09:51 AM, Anand Moon wrote:
>> Hi All,
>>
>> I am observing this deadlock or warning on my Odroid XU4.
>> I thinks the is related to clk from exynos5_i2c_xfer .... clk_prepare_enable
>> but I am not able to figure out which clk.
>>
>
> By reading your logs, it seems the problem is a possible ABBA deadlock since
> the S3C RTC driver grabs the prepare_lock and then the regmap->lock, and the
> CPUFreq driver leads to the locks being grabbed in the inverse order.
>
>> [ 11.640221] ======================================================
>> [ 11.646343] [ INFO: possible circular locking dependency detected ]
>> [ 11.652590] 4.6.0-rc2-xu4ml #35 Not tainted
>> [ 11.656749] -------------------------------------------------------
>> [ 11.662992] kworker/1:1/85 is trying to acquire lock:
>> [ 11.668010] (prepare_lock){+.+...}, at: [<c05bfed8>]
>> clk_prepare_lock+0x50/0xf8
>> [ 11.675375]
>> [ 11.675375] but task is already holding lock:
>> [ 11.681185] (sec_core:428:(regmap)->lock){+.+...}, at:
>> [<c0481aec>] regmap_read+0x2c/0x5c
>> [ 11.689417]
>> [ 11.689417] which lock already depends on the new lock.
>> [ 11.689417]
>> [ 11.697561]
>> [ 11.697561] the existing dependency chain (in reverse order) is:
>> [ 11.705008]
>> [ 11.705008] -> #1 (sec_core:428:(regmap)->lock){+.+...}:
>> [ 11.710467] [<c0482d30>] regmap_update_bits_base+0x30/0x70
>> [ 11.716545] [<c05c617c>] s2mps11_clk_prepare+0x30/0x38
>> [ 11.722262] [<c05c01f0>] clk_core_prepare+0x98/0xbc
>> [ 11.727711] [<c05c12bc>] clk_prepare+0x1c/0x2c
>> [ 11.732734] [<c0556fe4>] s3c_rtc_probe+0x2d0/0x43c
>
> the S3C RTC driver tries to prepare the RTC source clock S2MPS11_CLK_AP
> and that leads to the prepare_lock to be held and then the regmap->lock
> since s2mps11_clk_prepare() calls regmap_update_bits().
>
>> [ 11.738108] [<c046b9fc>] platform_drv_probe+0x4c/0xb0
>> [ 11.743749] [<c046a1fc>] driver_probe_device+0x20c/0x2b8
>> [ 11.749641] [<c0468594>] bus_for_each_drv+0x60/0x94
>> [ 11.755103] [<c0469f10>] __device_attach+0xb4/0x118
>> [ 11.760558] [<c04693b4>] bus_probe_device+0x88/0x90
>> [ 11.766020] [<c0469850>] deferred_probe_work_func+0x6c/0x9c
>> [ 11.772169] [<c013b52c>] process_one_work+0x1a8/0x514
>> [ 11.777806] [<c013b8d0>] worker_thread+0x38/0x56c
>> [ 11.783082] [<c0141d14>] kthread+0xf4/0x10c
>> [ 11.787847] [<c0107950>] ret_from_fork+0x14/0x24
>> [ 11.793050]
>> [ 11.793050] -> #0 (prepare_lock){+.+...}:
>> [ 11.797212] [<c0768dd8>] mutex_lock_nested+0x78/0x4dc
>> [ 11.802845] [<c05bfed8>] clk_prepare_lock+0x50/0xf8
>> [ 11.808304] [<c05c19c4>] clk_unprepare+0x1c/0x2c
>> [ 11.813499] [<c055d720>] exynos5_i2c_xfer+0x1dc/0x304
>
> and here the locks are grabbed in the inverse order, since the regulator
> driver uses regmap read (grabbing the regmap->lock) and then a clock is
> prepared in exynos5_i2c_xfer.
>
>> [ 11.819129] [<c0559620>] __i2c_transfer+0x13c/0x278
>> [ 11.824589] [<c05597f0>] i2c_transfer+0x94/0xc4
>> [ 11.829701] [<c04868f0>] regmap_i2c_read+0x48/0x64
>> [ 11.835074] [<c0482048>] _regmap_raw_read+0xb4/0x114
>> [ 11.840630] [<c04820cc>] _regmap_bus_read+0x24/0x58
>> [ 11.846084] [<c0481a68>] _regmap_read+0x60/0xb8
>> [ 11.851201] [<c0481afc>] regmap_read+0x3c/0x5c
>> [ 11.856224] [<c03e2354>] regulator_get_voltage_sel_regmap+0x20/0x54
>> [ 11.863109] [<c03dc5d4>] _regulator_get_voltage+0x20/0xb8
>> [ 11.863141] [<c03df058>] _regulator_do_set_voltage+0x240/0x370
>> [ 11.863173] [<c03df254>] regulator_set_voltage_unlocked+0xcc/0x230
>> [ 11.863205] [<c03df3e0>] regulator_set_voltage+0x28/0x54
>> [ 11.863234] [<c0478a94>] _set_opp_voltage+0x30/0x98
>> [ 11.863264] [<c0479ba8>] dev_pm_opp_set_rate+0x1e0/0x540
>> [ 11.863337] [<c0580824>] __cpufreq_driver_target+0x168/0x290
>> [ 11.863375] [<c0583b48>] od_dbs_timer+0xdc/0x164
>> [ 11.863407] [<c0584114>] dbs_work_handler+0x30/0x58
>> [ 11.863437] [<c013b52c>] process_one_work+0x1a8/0x514
>> [ 11.863465] [<c013b8d0>] worker_thread+0x38/0x56c
>> [ 11.863496] [<c0141d14>] kthread+0xf4/0x10c
>> [ 11.863528] [<c0107950>] ret_from_fork+0x14/0x24
>> [ 11.863538]
>> [ 11.863538] other info that might help us debug this:
>> [ 11.863538]
>> [ 11.863548] Possible unsafe locking scenario:
>> [ 11.863548]
>> [ 11.863557] CPU0 CPU1
>> [ 11.863565] ---- ----
>> [ 11.863589] lock(sec_core:428:(regmap)->lock);
>> [ 11.863612] lock(prepare_lock);
>> [ 11.863634] lock(sec_core:428:(regmap)->lock);
>> [ 11.863655] lock(prepare_lock);
>> [ 11.863664]
>> [ 11.863664] *** DEADLOCK ***
>> [ 11.863664]
>
> I should take a look in deep to the regmap and clock subsystems to better
> understand the issue on how to solve it. But AFAICT the problem is that
> the prepare_lock is a global mutex and the same regmap is used for both
> the s2mps11 clocks and regulators, so the ABBA deadlock described below
> can happen.
>
> Best regards,
> --
> Javier Martinez Canillas
> Open Source Group
> Samsung Research America

Thanks for this quick analysis.
I was just wondering where it's going wrong.

Best Regards
-Anand Moon

\
 
 \ /
  Last update: 2016-04-08 18:01    [W:0.080 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site